Accessories for Zebra VC83-08FOCABAABA-I

Manufacturer:

Zebra

MPN:

VC83-08FOCABAABA-I

Zebra VC8300 Freezer / Cold Store Android Vehicle Mount Computer

USB, RS232, BT, Wi-Fi, AZERTY, Android, deep-freeze environment

Vehicle terminal, 20.3 cm (8''), Touchscreen, capacitive, keypad (AZERTY, 67 keys, backlight), brightness: 1000cd, USB (2x), RS232 (2x), Bluetooth, Wi-Fi (802.11ac), audio, 1280x720 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (8.1)

operating: -30° up to +50°C, IP66

incl.: battery

12 Month Warranty

Zebra Whip Antenna (Stubby) - Dual Band (2.4Ghz/5Ghz) - 802.11a/b/g/n/ac - 2.4GHz 2dBi, 5GHz 3.7dBi - RPSMA connector - Magnetic Mount. Used when the vehicle computer is used in indoor/outdoor areas where an externally mounted antenna is needed for better coverage

Zebra Power Extension Cable DC, 6ft Waterproof

Zebra Power Extension Cable DC, 6ft Waterproof

Includes Screen Blanking feature

Zebra VC80 Side Mounted Holder for Scanner

Zebra VC80 U-MOUNT WITH VC70 HOLE PATTERN

The VC80 Series U-Mount is smaller than the one for the VC50 and has several mounting holes which allow drop-in replacements of VC70, and DLoGU-Mounts. It provides step less tilting of the VC and comes with the VC50 adapters.

Zebra VC80, VH10 - VESA Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Can also be attached to Quick Release Mount Plate (MT4205) - RAM D-size (2.25"") ball connected to a 4.75"" square plate with 4x100mm holes and 4x75mm holes in each corner - includes 4x bolts, nuts and lock washers

Zebra VC80, VH10 - Round Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball - Uses smaller footprint than VESA Plate (MT3501)

Zebra VC80, VH10 - Clamp Base (2"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (2"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Rail Base (2"" to 2-1/2"" max. pipe diameter) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Quick Release Mount - Allows a dismount of the vehicle mount computer without the need for tools - Can be used alone or in combination with the Cantilever Mount Kit (MT1002) or Vesa Plate Base (MT3501) 

includes Quick Release Mount that attaches to the sides of the vehicle mount computer and Mounting Plate (MT4205) that attaches to forklift