Accessories for Zebra VC8010SSAA11CBAAXX

Manufacturer:

Zebra

MPN:

VC8010SSAA11CBAAXX

Zebra VC80 Vehicle-Mounted Computer

Vehicle terminal, 26,4cm (10,4''), Touchscreen, resistive, 6 function keys, brightness: 400cd, USB, powered-USB, RS232 (2x), Bluetooth, Ethernet, Wi-Fi (internal antenna, 802.11ac), audio, 1024x768 pixels, Intel Dual Core, 1.3GHz, RAM: 2 GB, SSD: 32 GB, Win Embedded Standard 7, IP66  

Zebra Power Extension Cable DC, 6ft Waterproof

Zebra Power Extension Cable for Pre-Regulator with Ignition Sense

ZEBRA Keyboard Mounting Tray.

Includes Tilting Arms, Knobs And Screws. For Vc80 And Ikey Keyboards

Zebra VC80 Side Mounted Holder for Scanner

Zebra VC80, VH10 - VESA Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Can also be attached to Quick Release Mount Plate (MT4205) - RAM D-size (2.25"") ball connected to a 4.75"" square plate with 4x100mm holes and 4x75mm holes in each corner - includes 4x bolts, nuts and lock washers

Zebra VC80, VH10 - Round Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball - Uses smaller footprint than VESA Plate (MT3501)

Zebra VC80, VH10 - Clamp Base (2"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (2"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Clamp Base (3"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (3"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - 4"" RAM Mount - Short Arm - RAM D-size (2.25"") ball

Zebra VC80, VH10 - RAM Rectangular Base with RAM D-size (2.25"") ball - 2"" x 3"" base - Base will install directly on the back of the vehicle mount computer