Accessories for Zebra VC70N0-MA0U702G8WR

Manufacturer:

Zebra

MPN:

VC70N0-MA0U702G8WR

VC70 - Vehicle Mount Computer - WLAN 802.11abgn - 10.4"" XGA Touch Screen - 1024x768 LED Backlit Display with heater/defroster - 512MB RAM / 2GB Flash - No keyboard - Windows Embedded Compact 7 Pro

AC Line Cord - 1.8m, Grounded, NEMA 5-15P Plug Associated Countries Brazil & USA

Zebra Whip Antenna (Stubby) - Dual Band (2.4Ghz/5Ghz) - 802.11a/b/g/n/ac - 2.4GHz 2dBi, 5GHz 3.7dBi - RPSMA connector - Magnetic Mount. Used when the vehicle computer is used in indoor/outdoor areas where an externally mounted antenna is needed for better coverage

Zebra VC70 - AC Power Supply Cable - 6.5 ft long - For use with Level VI Power Supply PWR-BGA12V108W0WW - Replacement for 25-159550-01

Zebra VC70 - U Mount Bracket with mounting hardware - Attaches to VC70 shock mount plate - includes screws allowing the DC Power Supply (PWRS-9-60VDC-01R) to be mounted to the back of the VC70 on the shock plate - Bracket uses the same vehicle mounting holes as the VC5090 bracket for easy migration - Existing VC5090 U-Mount bracket cannot be used with the VC70

Zebra VC80, VH10 - VESA Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Can also be attached to Quick Release Mount Plate (MT4205) - RAM D-size (2.25"") ball connected to a 4.75"" square plate with 4x100mm holes and 4x75mm holes in each corner - includes 4x bolts, nuts and lock washers

Zebra VC80, VH10 - Round Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball - Uses smaller footprint than VESA Plate (MT3501)

Zebra VC80, VH10 - Clamp Base (2"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (2"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Clamp Base (3"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (3"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Rail Base (1-1/4"" to 1-7/8"" max. pipe diameter) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Rail Base (2"" to 2-1/2"" max. pipe diameter) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball