Accessories for Zebra VC70 Vehicle Mount Ultra-rugged Mobile Computer

Zebra VC70 - U Mount Bracket with mounting hardware - Attaches to VC70 shock mount plate - includes screws allowing the DC Power Supply (PWRS-9-60VDC-01R) to be mounted to the back of the VC70 on the shock plate - Bracket uses the same vehicle mounting holes as the VC5090 bracket for easy migration - Existing VC5090 U-Mount bracket cannot be used with the VC70

Zebra VC80, VH10 - VESA Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Can also be attached to Quick Release Mount Plate (MT4205) - RAM D-size (2.25"") ball connected to a 4.75"" square plate with 4x100mm holes and 4x75mm holes in each corner - includes 4x bolts, nuts and lock washers

Zebra VC80, VH10 - Round Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball - Uses smaller footprint than VESA Plate (MT3501)

Zebra VC80, VH10 - Clamp Base (2"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (2"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Clamp Base (3"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (3"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Rail Base (2"" to 2-1/2"" max. pipe diameter) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball

Zebra VC80, VH10 - 4"" RAM Mount - Short Arm - RAM D-size (2.25"") ball

Zebra VC80, VH10 - 12"" RAM Mount - Long Arm - RAM D-size (2.25"") ball

Zebra VC70 - External DC Power supply - 9-60V DC, 12V DC, Up to 10A - Can be used with electric or gass forklifts - Can be mounted to the back of the VC70 when the U Mount Bracket (KT-UMOUNT-VC70-R) is used - Requires DC Cable (25-159551-01) fused to the vehicle battery

Zebra RAM Bridge with RAM Mount (RAM-D-2461U) - 2.25"" diameter ball (RAM D size) with screws. Also includes screws to mount the External DC Power Supply (PWRS-9-60VDC-01R)