Accessories for M3 Mobile SL100N-12CHSS-HF

Manufacturer:

M3 Mobile

MPN:

SL100N-12CHSS-HF

M3 Mobile SL10 Truly Handy Handheld Mobile Computer

2D, SE4710, BT, Wi-Fi, NFC, GPS, Android

portable data collection device, 2D, imager (SE4710), GPS, Cam (8MP), 12.7 cm (5''), micro-USB, Bluetooth, Wi-Fi (802.11a/b/g/n), NFC, 1.5GHz, RAM: 2 GB, Flash: 16GB, Android (8.1), IP65

incl.: battery, 4000mAh

12 Month Warranty

M3 Mobile charging/ communication station, Ethernet, USB

Charging/ communication station, Ethernet, USB, 1x device, 1x spare battery

order separately: power supply, power cord

for: SL10

M3 Mobile protection boot for SL10

M3 Mobile power supply, EU

incl.: power cord (EU)

for: 1 slot charging-/communication station

M3 Mobile charging/ communication station, Ethernet, USB

Charging/ communication station, Ethernet, USB, 1x device, 1x spare battery

order separately: power supply, power cord

for: SL10K

M3 Mobile SL10 Passive holder with tilt swivel

For device without Rugged Boot.

Keep your unit in a passive holder and you will always have it within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. You have full access to the camera and all buttons and outlets when the device is in the holder. You can connect a charging cable or portable handsfree to the device when it is in the holder.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting platform.

M3 Mobile SL10 Active holder with cig-plug

With tilt swivel. 3A charging. 12/24V. With Easy-switching system. For device without Rugged Boot.

The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt.

Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting platform.

M3 Mobile SL10 Active holder for fixed installation

With tilt swivel. 3A charging. 12/24V. With Easy-switching system. For device without Rugged Boot.

An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection). 12/24 Volt. The product is E-approved. Connect the power cable with a 3 A fuse. 3 A charger. Professional installation recommended.

Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Connect the power cable with a 3A fuse. Professional installation recommended. Attach onto a ProClip Mounting Platform or a Pedestal Mount.

M3 Mobile spare battery

Spare battery, 4000 mAh for: SL10

M3 Mobile Service, 3 years

3 years service package from the start

includes comprehensive coverage

for: SL10, SL10K