Accessories for Zebra VC80 Vehicle-Mounted Computer

Zebra Enterprise Antenna 802.11 B/G

DIPOLE 2 DBI REVERSE POLARITY SMA CONNECTOR (STUBBY) 

Zebra Power Extension Cable DC, 6ft Waterproof

Zebra Power Extension Cable for Pre-Regulator with Ignition Sense

Zebra Power Cable Adapter CPC Connector to 100/240V AC Power Supply (for PS1450)

ZEBRA Keyboard Mounting Tray.

Includes Tilting Arms, Knobs And Screws. For Vc80 And Ikey Keyboards

Zebra VC80 Side Mounted Holder for Scanner

Zebra VC80, VH10 - VESA Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Can also be attached to Quick Release Mount Plate (MT4205) - RAM D-size (2.25"") ball connected to a 4.75"" square plate with 4x100mm holes and 4x75mm holes in each corner - includes 4x bolts, nuts and lock washers

Zebra VC80, VH10 - Round Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball - Uses smaller footprint than VESA Plate (MT3501)

Zebra VC80, VH10 - Clamp Base (2"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (2"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Clamp Base (3"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (3"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Rail Base (1-1/4"" to 1-7/8"" max. pipe diameter) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Rail Base (2"" to 2-1/2"" max. pipe diameter) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Quick Release Mount - Allows a dismount of the vehicle mount computer without the need for tools - Can be used alone or in combination with the Cantilever Mount Kit (MT1002) or Vesa Plate Base (MT3501) 

includes Quick Release Mount that attaches to the sides of the vehicle mount computer and Mounting Plate (MT4205) that attaches to forklift

Zebra VH10, VC80 - Mounting Plate for the MT4200 Quick Release Mount

Zebra VC80, VH10 - Adapter Bracket for the 82xx series Quick Release Mount

Zebra VC80, VH10 - 4"" RAM Mount - Short Arm - RAM D-size (2.25"") ball

Zebra VC80, VH10 - RAM Rectangular Base with RAM D-size (2.25"") ball - 2"" x 3"" base - Base will install directly on the back of the vehicle mount computer

Zebra External Voltage Pre-Regulator - VC80, VH10 - 19-90V DC in, 15V DC out, 90W - Allows the installation of the vehicle mount computer on electric trucks with batteries greater than 48V 

Requires Power Supply Cable (CA1210) to connect to the vehicle power supply and Power Supply Extension Cable (CA1230) to connect to the VH10 or VC80, both sold separately

• CA1210 - Power Extension Cable DC, 6ft Waterproof
• CA1230 - Power Extension Cable

Zebra AC/DC Power Supply Kit - 100-240V AC, 12V DC, 6A, 72W - VC80, VH10

includes Power Supply (PWR-BGA12V72W0WW) and Power Cable Adapter (CA4000) 

Requires country specific three-wire grounded (C13) AC Line Cord sold separately

• 50-16000-219R - AC Line Cord - UK
• 50-16000-220R - AC Line Cord - EU

Zebra Stylus and Stylus Holder - VC80, VH10