Accessories for Zebra VC70N0-AC-U-R

AC Line Cord - 1.8m, Grounded, NEMA 5-15P Plug Associated Countries Brazil & USA

Zebra Antenna - Dual Band (2.4Ghz/5Ghz) - 802.11a/b/g/n/ac - 2 dBi - RPSMA connector - Magnetic Mount - 2.9 meter cable. Used when the vehicle computer is used in indoor/outdoor areas where an externally mounted antenna is needed for better coverage

Zebra Whip Antenna (Stubby) - Dual Band (2.4Ghz/5Ghz) - 802.11a/b/g/n/ac - 2.4GHz 2dBi, 5GHz 3.7dBi - RPSMA connector - Magnetic Mount. Used when the vehicle computer is used in indoor/outdoor areas where an externally mounted antenna is needed for better coverage

Zebra VC70 - AC Power Supply Cable - 6.5 ft long - For use with Level VI Power Supply PWR-BGA12V108W0WW - Replacement for 25-159550-01

Zebra VC80, VH10 - VESA Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Can also be attached to Quick Release Mount Plate (MT4205) - RAM D-size (2.25"") ball connected to a 4.75"" square plate with 4x100mm holes and 4x75mm holes in each corner - includes 4x bolts, nuts and lock washers

Zebra VC80, VH10 - Round Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball - Uses smaller footprint than VESA Plate (MT3501)

Zebra VC80, VH10 - Clamp Base (2"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (2"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Clamp Base (3"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (3"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - 4"" RAM Mount - Short Arm - RAM D-size (2.25"") ball

Zebra VC80, VH10 - 12"" RAM Mount - Long Arm - RAM D-size (2.25"") ball

Zebra VC70 - External DC Power supply - 9-60V DC, 12V DC, Up to 10A - Can be used with electric or gass forklifts - Can be mounted to the back of the VC70 when the U Mount Bracket (KT-UMOUNT-VC70-R) is used - Requires DC Cable (25-159551-01) fused to the vehicle battery

Zebra RAM Bridge with RAM Mount (RAM-D-2461U) - 2.25"" diameter ball (RAM D size) with screws. Also includes screws to mount the External DC Power Supply (PWRS-9-60VDC-01R)

Zebra Enterprise Antenna 802.11 B/G

DIPOLE 2 DBI REVERSE POLARITY SMA CONNECTOR (STUBBY) 

Zebra VC70 - Power Supply Cable Extender - 6.5ft long - Allows the DC Power Supply (PWRS-9-60VDC-01R) to be mounted further from the VC70 (not mounted directly on the back) - Requires DC Power Supply (PWRS-9-60VDC-01R)

Zebra VC70 - DC Power Cable (9-60V DC) - 10ft long - Cable connects vehicle battery to DC Power Supply - includes vehicle ignition sense wire and fuse - Wire must be connected to positive terminal of vehicle battery if not connected to ignition

Zebra VC70 - DC Power Cable Adapter for VC5090 - 2ft long - Allows a vehicle wired for the VC5090 to use the VC70 - Connects the VC5090 Forklift Power Cable (25-71919-01R, 25-71919-02R, 25-71919-03R, 25-71919-04R) to the VC70 DC Power Supply (PWRS-9-60VDC-01R) - includes fuse - The fuse must be used to replace the existing fuse in the VC5090 Forklift Power Cable

Zebra Antenna - 2.4Ghz only - 802.11b/g - 5 dBi - RPSMA connector - Magnetic Mount - 2.9 meter cable. Used when the vehicle computer is used in indoor/outdoor areas where an externally mounted antenna is needed for better coverage

Zebra RIGHT ANGLE SMA REVERSE POLARITY PLUG-JACK ADAPTER

Zebra VC70 Spare Battery

Zebra VC70 - Numeric Keyboard Side Mount Bracket - Allows 21-Key numeric keyboard to be mounted to left or right side of the VC70 - includes screws

Zebra VC70 - 21-Key Numeric Keyboard with Side Mount Bracket - includes Keyboard Protection Grill (KT-KYBDGRL2-VC70-R) and Keypad Mounting Bracket (KT-KYBDMNT-VC70-R) with screws

Zebra VC70 - 65-Key QWERTY Keyboard with Mounting Tray - includes Keyboard Protection Grill (KT-KYBDGRL1-VC70-R) and Keyboard Mounting Tray (KT-KYBDTRAY-VC70-R), arms, knobs and screws

Zebra QWERTY / AZERTY Keyboard mounting tray. Includes tilting arms, knobs and screws.

Zebra VC70 - U Mount Bracket with mounting hardware - Attaches to VC70 shock mount plate - includes screws allowing the DC Power Supply (PWRS-9-60VDC-01R) to be mounted to the back of the VC70 on the shock plate - Bracket uses the same vehicle mounting holes as the VC5090 bracket for easy migration - Existing VC5090 U-Mount bracket cannot be used with the VC70

Zebra 2 Mount Adapter Arms - 3.5"" - for VC50 With Bolts

Zebra 2 Mount Adapter Arms - 7"" - for VC50 With Bolts

Zebra VC70 - 65-Key QWERTY Keyboard - Backlit - IP66 sealed - Connects to USB port on VC70 using a secure locking USB connector - includes Keyboard Protection Grill (KT-KYBDGRL1-VC70-R) - Requires Mounting Tray (KT-KYBDTRAY-VC70-R)

Zebra VC80, VH10 - Rail Base (1-1/4"" to 1-7/8"" max. pipe diameter) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Rail Base (2"" to 2-1/2"" max. pipe diameter) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball

Zebra RAM Mount RAM-D-2461U without Bridge - 2.25"" diameter ball (RAM D size) with screws. Used when the External DC Power Supply (PWRS-9-60VDC-01R) has to be mounted away or when AC power supply is used

Zebra External Antenna Adapter - VC70 - 10 Pack - RP-SMA to RTRP-SMA - Adapter allows standard external antennas to be attached to VC70 external antenna connector

Zebra External Antenna Adapter - VC70 - 10 Pack 

RP-SMA to RTRP-SMA - Adapter allows standard external antennas to be attached to VC70 external antenna connector

Zebra Stylus and Stylus Holder - VC80, VH10

Zebra 65 Key QWERTY Keyboard with Mounting Tray - VC70 - IP66 Sealed - Connects to USB port on VC70 using a secure locking USB connector - includes Keyboard Mounting Tray (KT-KYBDTRAY-VC70-R), arms, knobs and screws

Zebra Power Supply 100-240VAC,12VDC,9A

Power supply for charge only- and ethernet cradles

Order separately: DC-cable (50-16002-029R), power cord