Accessories for Socket Mobile D600 Contactless NFC & RFID (HF) Reader - Writer

The Socket Charging Stand is a stand for the Series 7, 700 Series barcode scanners and D600 RFID reader/writer.

It is designed to remain secure on any flat surface where you need to maximize barcode scanning efficiency and productivity. The ingenious design incorporates a small magnet built into the top of the mounting arch that makes contact with the magnet housed on the bottom of the scanners, helping to firmly secure the scanner to the Charging Stand.

---

Socket Charging Mount For SocketScan and DuraScan 700 Series Readers

The Charging Mount for the 700 Series and Series 7 barcode scanners is designed for placement flexibility to maximize barcode scanning. The ingenious design incorporates a small magnet built into the top of the Mount that makes contact with the magnet housed on the bottom of the scanners, helping to firmly secure the barcode scanner to the Charging Mount.

Charging mount works for all 700 Series Scanners:

SocketScan

• S700
• S730
• S740
• S760

DuraScan

• D700
• D730
• D740
• D745
• D750
• D755
• D760
• 7 Series

Use auto scan mode with D740, D745, D750, D755, D760, S740, and S760 Barcode scanners.

Includes

• Charging Mount (assembly required)
• 2 Meters USB Charging Cable
• 2 Hex Nuts
• 1 Hanger Bolt

---

Socket Charging Cradle for DuraScan 600 & 700 Series Readers

The charging cradle is designed to recharge and provide easy storage of the DuraScan 600 and DuraScan 700 Series scanners. When not in use or in between scanning sessions, scanners can charge on the cradle, set up in multiple ways. A multi-angle mounting bracket sets the cradle in different positions on a flat surface or attaches to a wall for optimal comfort. The cradle features a floating contact charge system – simply set the DuraScan scanner in the cradle to charge the scanner. An easy-to-view power LED indicates the cradle is ready for charging. And, for additional convenience, the cradle is designed to use with the lanyard or wrist strap attached to the scanner when charging.

Charging cradle works with the following DuraScan 600 and DuraScan 700 Series Scanners:

• D600
• D700
• D730
• D740
• D750

Cradle is not compatible with SocketScan family of scanners.

• Includes
• Charging Cradle
• Charging Cable
• AC Adapter
• Mounting bracket and 2 mounting screws

---

Charge your DuraScan 700 Series scanner with this Type C - AC Power Supply

Type C - AC Power Supply, 1 AMP, USB (EUROPE ONLY)

---

Charge your DuraScan 700 Series scanner with this Type G - AC Power Supply

Type G - AC Power Supply, 1 AMP, USB (UNITED KINGDOM & HONG KONG ONLY)

---

EIAJ-02 Cable to USB Cable - Conveniently charge Socket Mobile Series 7, 600/700 Series barcode scanners from a USB slot (2A maximum).

Perfect for on-the-go, mobile charging from a notebook computer or other device or from any environment with limited access to AC power outlets.

Plug directly into scanner or into Charging Cradle. 

Length 3.3 ft (1m)

---

Expends and Enhances Standard 1 year warranty into 3 or 5 year warranty from date of purchase as follows:

• Technical Support via Website
• Same Day response time
• Custom (800)for Technical Support
• 7-10 Day turnaround for Repair or Replacement for covered items

---

Expands and Enhances Standard 1 year warranty into 5 year warranty from date of purchase as follows: -Technical Support via Website - Same Day response time -Custom (800) for Technical Support -7-10 Day turnaround for Repair or Replacement for covered items

---