Brother Pro Tape Cartridges for Cable Identification

Brother HSE-221E 9mm Black on White Heat Shrink Tube

• 9mm black on white heat shrink tube
• 3:1 shrink ratio
• 1.5m long
• shrinks when heated to allow easy cable identification
• recommended for use with cables between 2.6mm to 5.1mm
• ensures a durable & easy to read the result

Brother P-touch Tapes are built with tough and durable professional grade materials and adhesives. Developed to meet the needs of tradespeople and other professionals looking for reliable long-term identification that withstands the test of time.

This 9mm black on white HSe-221E tape cassette has been designed specifically for the marking and identifying of cables, fibre and wires with an outside diameter of 2.6mm to 5.1mm.

When the printed tube is placed over a cable and heated with a heat gun, the tube shrinks down, gripping the cable tightly. No adhesive is needed, ensuring that even in warm environments the heat shrink tube will not unpeel from the cable.

TZe tape cassettes are quick and easy to install and come in various label widths, colours and materials. So, no matter what the job, these tapes can provide you with crisp, sharp and easily readable labels to get the job done.

This non-adhesive tape is made of a special material that is wound in the tape cassette as a flat tube. Once printed with the relevant identification details, the tube is opened up and passed over a cable or terminating connector. Once heated using a heat gun, the tube shrinks to about half its original width, and in doing so grips the cable.

Applications:
Electrical Wires
Cables

Compatible with the following Brother Label Machines:
PT-E300VP, PT-E550WSP, PT-E550WVP, PT-E550WVPNI, PT-D800W, PT-P900W, PT-P950NW

Brother HSE-251E 21mm Black on White Heat Shrink Tube

• 21mm black on white heat shrink tube
• 3:1 shrink ratio
• 1.5m long
• shrinks when heated to allow easy cable identification
• recommended for use with cables between 7.3mm to 14.3mm
• ensures a durable & easy to read result

Brother P-touch Tapes are built with tough and durable professional grade materials and adhesives. Developed to meet the needs of tradespeople and other professionals looking for reliable long-term identification that withstands the test of time.

This 21mm black on white HSe-251E tape cassette has been designed specifically for the marking and identifying of cables, fibre and wires with an outside diameter of 7.3mm to 14.3mm.

When the printed tube is placed over a cable and heated with a heat gun, the tube shrinks down, gripping the cable tightly. No adhesive is needed, ensuring that even in warm environments the heat shrink tube will not unpeel from the cable.

TZe tape cassettes are quick and easy to install and come in various label widths, colours and materials. So, no matter what the job, these tapes can provide you with crisp, sharp and easily readable labels to get the job done.

This non-adhesive tape is made of a special material that is wound in the tape cassette as a flat tube. Once printed with the relevant identification details, the tube is opened up and passed over a cable or terminating connector. Once heated using a heat gun, the tube shrinks to about half its original width, and in doing so grips the cable.

Applications:
Electrical Wires
Cables

Compatible with the following Brother Label Machines:
PT-E300VP, PT-E550WSP, PT-E550WVP, PT-E550WVPNI, PT-D800W, PT-P900W, PT-P950NW

Brother STE151 3M x 24mm Stamp Cassette
 

• 24mm stamp cassette
• 3m long
• for electrochemical etching/marking
• use on metallic and glass surfaces
• requires electrochemical etching equipment

Brother P-touch Tapes are built with tough and durable professional grade materials and adhesives. Developed to meet the needs of tradespeople and other professionals looking for reliable long-term identification that withstands the test of time.

The STe-151 stencil tape is a non-adhesive tape used as a mask to permanently mark (etch) conductive surfaces using electrolytic marking chemicals and equipment, or to mark (etch) glass using a glass etching paste. This tape enables you to quickly create stencils in a variety of lengths so you can add individual SKU numbers, part numbers or logos to ensure everything stays permanently marked. Compatible with P-touch label printers that show the TZ or TZe logo on the tape cassette cover.

TZe tape cassettes are quick and easy to install and come in various label widths, colours and materials. So, no matter what the job, Pro Tapes can provide you with crisp, sharp and easily readable labels to get the job done.

When printed small holes are made in the tape that allows the etching chemical to permeate through the tape. When an etching pad is placed over the tape and pushed onto the metallic item, an electrical circuit is completed. The metal then discolours and is permanently marked with serial numbers or other required information.

Applications:
Use on metallic and glass surfaces
Permanent part marking
Product marking and customisation

Compatible with the following Brother Label Machines:
PT-D800W, PT-P900W, PT-P950NW

Brother HSE-651E 21mm Black on Yellow Heat Shrink Tube

• 21mm black on yellow heat shrink tube
• 3:1 shrink ratio
• 1.5m long
• shrinks when heated to allow easy cable identification
• recommended for use with cables between 7.3mm to 14.3mm
• ensures a durable & easy to read result

Brother P-touch Tapes are built with tough and durable professional grade materials and adhesives. Developed to meet the needs of tradespeople and other professionals looking for reliable long-term identification that withstands the test of time.

This 21mm black on yellow HSe-651E tape cassette has been designed specifically for the marking and identifying of cables, fibre and wires with an outside diameter of 7.3mm to 14.3mm.

When the printed tube is placed over a cable and heated with a heat gun, the tube shrinks down, gripping the cable tightly. No adhesive is needed, ensuring that even in warm environments the heat shrink tube will not unpeel from the cable.

TZe tape cassettes are quick and easy to install and come in various label widths, colours and materials. So, no matter what the job, these tapes can provide you with crisp, sharp and easily readable labels to get the job done.

This non-adhesive tape is made of a special material that is wound in the tape cassette as a flat tube. Once printed with the relevant identification details, the tube is opened up and passed over a cable or terminating connector. Once heated using a heat gun, the tube shrinks to about half its original width, and in doing so grips the cable.

Applications:
Electrical Wires
Cables

Compatible with the following Brother Label Machines:
PT-E300VP, PT-E550WSP, PT-E550WVP, PT-E550WVPNI, PT-D800W, PT-P900W, PT-P950NW

Brother STE161 3M x 36mm Stamp Cassette

• 36mm stamp cassette
• 3m long
• for electrochemical etching/marking
• use on metallic and glass surfaces
• requires electrochemical etching equipment

Brother P-touch Tapes are built with tough and durable professional grade materials and adhesives. Developed to meet the needs of tradespeople and other professionals looking for reliable long-term identification that withstands the test of time.

The STe-161 stencil tape is a non-adhesive tape used as a mask to permanently mark (etch) conductive surfaces using electrolytic marking chemicals and equipment, or to mark (etch) glass using a glass etching paste. This tape enables you to quickly create stencils in a variety of lengths so you can add individual SKU numbers, part numbers or logos to ensure everything stays permanently marked. Compatible with P-touch label printers that show the TZ or TZe logo on the tape cassette cover.

TZe tape cassettes are quick and easy to install and come in various label widths, colours and materials. So, no matter what the job, Pro Tapes can provide you with crisp, sharp and easily readable labels to get the job done.

When printed small holes are made in the tape that allows the etching chemical to permeate through the tape. When an etching pad is placed over the tape and pushed onto the metallic item, an electrical circuit is completed. The metal then discolours and is permanently marked with serial numbers or other required information.

Applications:
Use on metallic and glass surfaces
Permanent part marking
Product marking and customisation

Compatible with the following Brother Label Machines:
PT-D800W, PT-P900W, PT-P950NW

Brother HSE-211E 5.2mm Black on White Heat Shrink Tube

• 5.2mm black on white heat shrink tube
• 3:1 shrink ratio
• 1.5m long
• shrinks when heated to allow easy cable identification
• recommended for use with cables between 1.7mm to 3.2mm
• ensures a durable & easy to read the result

Brother P-touch Tapes are built with tough and durable professional grade materials and adhesives. Developed to meet the needs of tradespeople and other professionals looking for reliable long-term identification that withstands the test of time.

This 5.2mm black on white HSe-211E tape cassette has been designed specifically for the marking and identifying of cables, fibre and wires with an outside diameter of 1.7mm to 3.2mm.

When the printed tube is placed over a cable and heated with a heat gun, the tube shrinks down, gripping the cable tightly. No adhesive is needed, ensuring that even in warm environments the heat shrink tube will not unpeel from the cable.

TZe tape cassettes are quick and easy to install and come in various label widths, colours and materials. So, no matter what the job, these tapes can provide you with crisp, sharp and easily readable labels to get the job done.

This non-adhesive tape is made of a special material that is wound in the tape cassette as a flat tube. Once printed with the relevant identification details, the tube is opened up and passed over a cable or terminating connector. Once heated using a heat gun, the tube shrinks to about half its original width, and in doing so grips the cable.

Applications:
Electrical Wires
Cables

Compatible with the following Brother Label Machines:
PT-E300VP, PT-E550WSP, PT-E550WVP, PT-E550WVPNI, PT-D800W, PT-P900W, PT-P950NW

Brother HSE-261E 31mm Black on White Heat Shrink Tube

• 31mm black on white heat shrink tube
• 3:1 shrink ratio
• 1.5m long
• shrinks when heated to allow easy cable identification
• recommended for use with cables between 7.3mm to 14.3mm
• ensures a durable & easy to read result

Brother P-touch Tapes are built with tough and durable professional grade materials and adhesives. Developed to meet the needs of tradespeople and other professionals looking for reliable long-term identification that withstands the test of time.

This 31mm black on white HSe-261E tape cassette has been designed specifically for the marking and identifying of cables, fibre and wires with an outside diameter of 7.3mm to 14.3mm.

When the printed tube is placed over a cable and heated with a heat gun, the tube shrinks down, gripping the cable tightly. No adhesive is needed, ensuring that even in warm environments the heat shrink tube will not unpeel from the cable.

TZe tape cassettes are quick and easy to install and come in various label widths, colours and materials. So, no matter what the job, these tapes can provide you with crisp, sharp and easily readable labels to get the job done.

This non-adhesive tape is made of a special material that is wound in the tape cassette as a flat tube. Once printed with the relevant identification details, the tube is opened up and passed over a cable or terminating connector. Once heated using a heat gun, the tube shrinks to about half its original width, and in doing so grips the cable.

Applications:
Electrical Wires
Cables

Compatible with the following Brother Label Machines:
PT-D800W, PT-P900W, PT-P950NW

Brother HSE-611E 5.2mm Black on Yellow Heat Shrink Tube

• 5.2mm black on yellow heat shrink tube
• 3:1 shrink ratio
• 1.5m long
• shrinks when heated to allow easy cable identification
• recommended for use with cables between 1.7mm to 3.2mm
• ensures a durable & easy to read the result

Brother P-touch Tapes are built with tough and durable professional grade materials and adhesives. Developed to meet the needs of tradespeople and other professionals looking for reliable long-term identification that withstands the test of time.

This 5.2mm black on yellow HSe-611E tape cassette has been designed specifically for the marking and identifying of cables, fibre and wires with an outside diameter of 1.7mm to 3.2mm.

When the printed tube is placed over a cable and heated with a heat gun, the tube shrinks down, gripping the cable tightly. No adhesive is needed, ensuring that even in warm environments the heat shrink tube will not unpeel from the cable.

TZe tape cassettes are quick and easy to install and come in various label widths, colours and materials. So, no matter what the job, these tapes can provide you with crisp, sharp and easily readable labels to get the job done.

This non-adhesive tape is made of a special material that is wound in the tape cassette as a flat tube. Once printed with the relevant identification details, the tube is opened up and passed over a cable or terminating connector. Once heated using a heat gun, the tube shrinks to about half its original width, and in doing so grips the cable.

Applications:
Electrical Wires
Cables

Compatible with the following Brother Label Machines:
PT-E300VP, PT-E550WSP, PT-E550WVP, PT-E550WVPNI, PT-D800W, PT-P900W, PT-P950NW

Brother HSE-661E 31mm Black on Yellow Heat Shrink Tube

• 31mm black on Yellow heat shrink tube
• 3:1 shrink ratio
• 1.5m long
• shrinks when heated to allow easy cable identification
• recommended for use with cables between 7.3mm to 14.3mm
• ensures a durable & easy to read result

Brother P-touch Tapes are built with tough and durable professional grade materials and adhesives. Developed to meet the needs of tradespeople and other professionals looking for reliable long-term identification that withstands the test of time.

This 31mm black on yellow HSe-661E tape cassette has been designed specifically for the marking and identifying of cables, fibre and wires with an outside diameter of 7.3mm to 14.3mm.

When the printed tube is placed over a cable and heated with a heat gun, the tube shrinks down, gripping the cable tightly. No adhesive is needed, ensuring that even in warm environments the heat shrink tube will not unpeel from the cable.

TZe tape cassettes are quick and easy to install and come in various label widths, colours and materials. So, no matter what the job, these tapes can provide you with crisp, sharp and easily readable labels to get the job done.

This non-adhesive tape is made of a special material that is wound in the tape cassette as a flat tube. Once printed with the relevant identification details, the tube is opened up and passed over a cable or terminating connector. Once heated using a heat gun, the tube shrinks to about half its original width, and in doing so grips the cable.

Applications:
Electrical Wires
Cables

Compatible with the following Brother Label Machines:
PT-D800W, PT-P900W, PT-P950NW 

Brother FLE-2511 Die-cut Flexi Flag Label Black on White 21 x 45mm

• 24mm Black on White Die-cut non-laminated flag label
• Use for wires and cables with a diameter of 2.0 to 8.0mm
• 72 labels

Brother P-touch Tapes are built with tough and durable professional grade materials and adhesives. Developed to meet the needs of tradespeople and other professionals looking for reliable long-term identification that withstands the test of time.

The FLe-2511 flag tape is suitable for small diameter cables from 2.0mm to 8.0mm, making this label ideal for fibre optic cable identification in the network industry. The label is a special pre-cut shape, and once printed the long “tail” can be placed around the cable and the label simply folded over the tail to lock the label into position

TZe tape cassettes are quick and easy to install and come in various label widths, colours and materials. So, no matter what the job, these tapes can provide you with crisp, sharp and easily readable labels to get the job done.

Suited for small diameter cables, making this label ideal for fibre optic cable identification in the network industry. The label is a special pre-cut shape, and once printed the long “tail” can be placed around the cable, and the label simply folded over the tail to lock the label into position.

Applications:
LAN cable (patch cord, permanent link, Cat5e, CAT6a)
Fibre optic cable

Compatible with the following Brother Label Machines:
PT-D800W, PT-P900W, PT-P950NW