Accessories for Zebra WS501 Android Wearable Computer

Zebra WS50 Spare Battery with PowerPrecision - Converged (1300 mAh)

Designed, manufactured & tested to meet rigorous controls & standards

Premium-grade cells with higher capacity & longer life cycle

Designed to help prevent overcharging & electrical shock

Strong & robust housing for optimal performance & durability

Information available:
- Available charge status
- Total charge accumulated on the battery
- Basic state of health

Zebra WS50 10-Slot Charge-Only Cradle - Converged

Charges up to ten WS50 Converged configuration devices.

Cradle includes Converged shims (black colour). Can be converted to accommodate Wrist config device by substituting with Gray colour shims

Requires: DC Line Cord (CBL-DC-382A1-01), Power Supply (PWR-BGA12V108W0WW) and AC Line Cord

Zebra WS50 Dual Slot Charge-Only Cradle - Converged

Charges up to two WS50 Converged configuration devices.

Device with Finger mount can be dropped directly into cradle. If using Back of Hand mount the soft good must be removed before inserting into cradle.

Cradle includes Converged shims (black colour). Can be converted to accommodate Wrist config device by substituting with Gray colour shims.

Requires: Power Supply (PWR-BGA12V50W0WW, DC Line Cord (CBL-DC-388A1-01) and AC Line Cord

Zebra WS50 5-Slot Ethernet + Charge Cradle with Spare Battery Charging - Converged

Allows Ethernet speeds up to 1 Gb

Charges up to five WS50 Converged configuration units and five spare batteries

Can also be wall or rack mounted using Mounting Bracket (BRKT-SCRD-SMRK-01)

Cradle includes Converged shims (black colour). Can be converted to accommodate Wrist config device by substituting with Gray colour shims

Requires: DC Line Cord (CBL-DC-382A1-01), Power Supply (PWR-BGA12V108W0WW) and AC Line Cord

Zebra WS50 4-Slot Battery Charger - Converged

Charges up to 4 Spare Batteries for Converged configuration devices (1300mAh battery)

Up to 4 Battery Chargers can be wall or rack mounted using Mounting Bracket (BRKT-SCRD-SMRK-01)
Black

Charger includes Converged shims (black colour). Can be converted to accommodate Wrist config batteries by substituting with Gray colour shims

Requires: Power Supply (PWR-BGA12V50W0WW), DC Line Cord (CBL-DC-388A1-01) and AC Line Cord

Zebra WS50 Left Hand Wrap - Medium

Replaces the fabric hand wrap that is included with WS50 units configured as Back of Hand use.

Colour of stitching on Hand Wrap indicates size:

Blue = Large
Black = Medium
White = Small

NOTE: Hand Wrap is identical to RS5100 / RS6100 Hand Wrap for Enterprise Hand Mount and can be freely interchanged (i.e. SG-WEAR-HNWPRL-01 is the same as SG-RS51-HNWPRL-01)

Zebra WS50 Left Hand Wrap - Small

Replaces the fabric hand wrap that is included with WS50 units configured as Back of Hand use.

Colour of stitching on Hand Wrap indicates size:

Blue = Large
Black = Medium
White = Small

NOTE: Hand Wrap is identical to RS5100 / RS6100 Hand Wrap for Enterprise Hand Mount and can be freely interchanged (i.e. SG-WEAR-HNWPRL-01 is the same as SG-RS51-HNWPRL-01)

Zebra WS50 Right Hand Wrap - Medium

Replaces the fabric hand wrap that is included with WS50 units configured as Back of Hand use.

Colour of stitching on Hand Wrap indicates size:

Blue = Large
Black = Medium
White = Small

NOTE: Hand Wrap is identical to RS5100 / RS6100 Hand Wrap for Enterprise Hand Mount and can be freely interchanged (i.e. SG-WEAR-HNWPRL-01 is the same as SG-RS51-HNWPRL-01)

Zebra WS50 Snap-on USB / Charge Cable

Allows WS50 to be charged and also provides USB host and client communications.

Cable has a 6" (15 cm) pigtail cable with USB-C female port.

Requires: USB-C cable (CBL-TC5X-USBC2A-01 or similar 3rd party USB-C standard cable

Optional USB charger... order Country Specific version of USB Power Supply (PWR-WUA5V12W0xx)

Zebra WS50 20-Slot Battery Charger - Converged

Charges up to 20 Spare batteries for Converged configuration devices 1300mAh battery)

Can be wall or rack mounted using Mounting Bracket (BRKT-SCRD-SMRK-01)

Charger includes Converged shims (black colour). Can be converted to accommodate Wrist config batteries by substituting with Gray colour shims.

Requires: DC Line Cord (CBL-DC-382A1-01), Power Supply (PWR-BGA12V108W0WW) and AC Line Cord