Accessories for Zebra WS5001-0B2J3020EA6

Zebra WS50 Wrist Strap - Small

Used for replacement or converting a Converged configuration to Wrist configuration.

Length of strap is about 7.8" (20cm)

Zebra rack/wall mounting bracket

Allows to install any single slot or multi slot cradle on a wall or a 19" IT rack. The bracket also allows to install up to four 4 slot spare battery chargers together on a wall or standard 19" IT rack.

Zebra WS50 Spare Battery with PowerPrecision - Wrist (800 mAh)

Designed, manufactured & tested to meet rigorous controls & standards

Premium-grade cells with higher capacity & longer life cycle

Designed to help prevent overcharging & electrical shock

Strong & robust housing for optimal performance & durability

Information available:
- Available charge status
- Total charge accumulated on the battery
- Basic state of health

Zebra WS50 Snap-on USB / Charge Cable

Allows WS50 to be charged and also provides USB host and client communications.

Cable has a 6" (15 cm) pigtail cable with USB-C female port.

Requires: USB-C cable (CBL-TC5X-USBC2A-01 or similar 3rd party USB-C standard cable

Optional USB charger... order Country Specific version of USB Power Supply (PWR-WUA5V12W0xx)

Zebra WS50 Charge Cable with Micro-USB female port.

Snaps on to bottom of WS50 device to provide charging and client-host communications. Cable length 6 inches / 15cm.

Requires separate purchase of Micro-USB to USB-A cable and AC power adapter.

Zebra WS50 10-Slot Charge-Only Cradle - Wrist

Charges up to ten WS50 Wrist configuration devices.

Cradle includes Wrist shims (gray
colour). Can be converted to accommodate Converged config device by substituting with Black colour
shims

Requires: DC Line Cord (CBL-DC-382A1-01), Power Supply (PWR-BGA12V108W0WW) and AC Line Cord

Zebra WS50 Dual Slot Charge-Only Cradle - Converged

Charges up to two WS50 Converged configuration devices.

Device with Finger mount can be dropped directly into cradle. If using Back of Hand mount the soft good must be removed before inserting into cradle.

Cradle includes Converged shims (black colour). Can be converted to accommodate Wrist config device by substituting with Gray colour shims.

Requires: Power Supply (PWR-BGA12V50W0WW, DC Line Cord (CBL-DC-388A1-01) and AC Line Cord

Zebra WS50 Dual Slot Charge-Only Cradle - Wrist

Charges up to two WS50 Wrist configuration devices.

Cradle includes Wrist shims (gray colour). Can be converted to accommodate Converged config device by substituting with Black colour shims

Requires: Power Supply (PWR-BGA12V50W0WW), DC Line Cord (CBL-DC-388A1-01) and AC Line Cord

Zebra WS50 5-Slot Ethernet + Charge Cradle with Spare Battery Charging - Wrist

Allows Ethernet speeds up to 1 Gb

Charges up to five WS50 Wrist configuration units and five spare batteries

Can also be wall or rack mounted using Mounting Bracket (BRKT-SCRD-SMRK-01)

Cradle includes Wrist shims (gray colour). Can be converted to accommodate Converged config
device by substituting with Black colour shims.

Requires: DC Line Cord (CBL-DC-382A1-01), Power Supply (PWR-BGA12V108W0WW) and AC Line Cord

Zebra WS50 20-Slot Battery Charger - Wrist

Charges up to 20 Spare batteries for Wrist configuration devices (800mAh battery)

Can be wall or rack mounted using Mounting Bracket (BRKT-SCRD-SMRK-01)

Charger includes Wrist shims (gray colour). Can be converted to accommodate Converged config
batteries by substituting with Black colour shims.

Requires: DC Line Cord (CBL-DC-382A1-01), Power Supply (PWR-BGA12V108W0WW) and AC Line Cord