Accessories for Zebra WCMTB-T27B8ABD8-A6

Zebra charger - will charge up to five TC22 / TC27 devices.

• Charges Standard Capacity battery from 0 to 80% in less than 1hour 20 minutes.
• Charges Extended Capacity battery from 0 to 80% in less than 1hour 50 minutes.
• Compatible with TC22/ TC27 units with hand strap or trigger handle attached (and shim removed). Can be rack-mounted in a standard 19-inch server rack via mounting bracket SKU#BRKT-SCRD-SMRK-01.

Zebra single-slot charger and USB cradle - Charges a single device.

• Charges standard capacity battery from 0 to 80% in less than 1 hour 20 minutes.
• Charges extended capacity battery from 0 to 80% in less than 1hour 50 minutes.
• Compatible with TC22 / TC27 devices with hand straps, trigger handle or protective boot when shim is removed.

Includes:Shim for use with TC22 / TC27 without rugged boot. Remove the shim for compatibility with TC22 / TC27 with rugged boot / trigger handle.

To charge and sync using USB port with a computer, purchase USB cable 25-124330-01R.To connect to Ethernet, purchase USB-to-Ethernet module MOD-MT2-EU1-01 with bracket BRKT-TC51ENET1-02.

Zebra 5-Slot Ethernet Cradle

Allows network speeds up to 1Gbps. Connects to USB-C connector and 2-pin charge contacts on bottom of TC22/TC27. Will charge up to five TC22 / TC27 units. Compatible with TC22 / TC27 units with hand strap or trigger handle attached. Can be rack-mounted in a standard 19-inch server rack via mounting bracket BRKT-SCRD-SMRK-01.

• Charges Standard Capacity battery from 0 to 80% in less than 1 hour 20 minutes.
• Charges Extended Capacity battery from 0 to 80% in less than 1 hour 50 minutes.

Zebra Battery Charger Replacement Kit - 4 Slot

• 4-slot battery charger replacement cup. Used to replace a legacy TC21 / TC26 series 4-slot battery.

Charger on single-slot or multi-slot ShareCradlebase when migrating from TC21 / TC26 to TC22 / TC27. No more than one cup shall be installed on a multi-slot ShareCradlebase when converting with this 4-slot battery charger cup. Should replace the TC21/TC26 toaster cup in the same location on the ShareCradlebase, usually the left-most slot when facing the cradle.

Zebra Device Cradle Cup Replacement Kit

Kit allows the conversion of other devices' 5-Slot Charge + Communication ShareCradles purchased after 2019 to support TC22 / TC27.

• Only compatible with cradles that use ShareCradledesign.
• Kit includes five TC22 / TC27 ShareCradlecups and shims.
• Not all five cups need to be used, therefore creating a multi-slot cradle supporting a mixed combination of devices (e.g., two TC22 / TC27 and three TC5X devices).

Zebra USB - Ethernet Adapter kit for ShareCradle single slot.

SKU# KT-TC51-ETH1-01

Connects single-slot charge/USB charger to a local area network via Ethernet over USB.

10/100/1000 Mbps speed with LEDs on module to indicate connectivity and speed.

Mechanical switch to choose micro-USB port or RJ45 Ethernet.

Includes: USB-Ethernet Module SKU# MOD-MT2-EU1-01 and support bracket SKU# BRKT-TC51-ENET1-01.

Zebra USB to Ethernet module kit

Connects a single-slot charge/USB charger to a local area network via Ethernet over USB.

• 10/100/1000 Mbps speed
• LEDs on module to indicate connectivity and speed
• Mechanical switch to choose micro-USB port or RJ45 Ethernet

Zebra power supply for 5 slot cradle - AC input: 100-240V, 2.8A, DC output: 12V, 9A, 108W

• Order separately: DC line cord CBL-DC-381A1-01, AC mains power cord

Zebra power supply - 12 VDC, 4,16 A for single slot cradle

• Requires: DC line cord (specific DC cord dependent on product) also AC line cord

Zebra wall charger - UK power supply

• Power supply 100-240 VAC, 5V, 2.5A with UK plug
• Order separately: Device connection cable (USB, type A)