Accessories for Zebra LI3608-ER20003VZWW

Manufacturer:

Zebra

MPN:

LI3608-ER20003VZWW

GTIN:

5704174198284

Zebra LI3608-ER Ultra-Rugged Corded Handheld 1D Linear Imager - Extended Range

LI3608-ER, 1D, ER, multi-IF, black, green

handheld scanner, industry, 1D, linear imager, extended range, multi-interface (RS232, KBW, USB), protection class: IP67

order separately: interface cable

colour: black, green

36 Month Warranty

Zebra 7ft (2.13m) Straight Shielded USB Cable (Type A Connector, 12V) - Low Temp -30 (Freezer Rated)

Requires Power Supply (PWR-BGA12V50W0WW), DC Cable (CBL-DC-451A1-01) and country specific three-wire grounded (C13) AC Line Cord, all sold separately - Compatible with DS3608, LI3608, STB3678, FLB3678 (DS3678, LI3678)

Zebra 9ft (2.8m) Shielded USB Amphenol threaded circular connector Cable - Coiled - Low Temp -30C (Freezer Rated) - DS36xx to VC5090 or FLC9000 - Not capable of powering DS3608-ER, CBA-UF5-C09ZAR should be used instead - Cannot be used with full screen VC5090 computers that use an external keyboard, as the keyboard uses the rugged USB connector - Will charge a fully depleted battery in approximately 10.5hrs when connected to the 36xx cradle (STB3678 or FLB3678)

Zebra CABLE - USB, RS232 "Y" POWER STEALER, 9FT COILED, -30C

Zebra 9ft (2.8m) VC5000 or FLC9000 to DS3608-ER 'Y' Coiled Cable (USB) - Low Temp -30┬░C (Freezer Rated) - Provides USB communication between VC5090 or FLC9000 and scanner - Y Cable is designed to connect to either VC5090 COM1 or COM2 and USB A port or FLC9000 COM1 and USB port - When connecting to the FLC9000, USB host adapter (25-71915-01R) is required and the MC92 may need to be set to USB Host Mode - COM1 or COM2 port provides additional power needed for DS3608-ER, however an application (i.e. SerialWedge or DataWedge) must be used, to open the COM port before power will be applied to it

Zebra 12ft (3.66m) Coiled Shielded USB Cable (Type A Locking Connector for VC70) - Low Temp -30C (Freezer Rated) - USB cable locks onto VC70 using two screws - When connected to STB3678 or FLB3678, will charge a fully depleted battery in about 10 hours (provides 500 maH current to cradle) - Compatible with DS3608, LI3608, STB3678, FLB3678 (DS3678, LI3678)