Accessories for Zebra DS3678-HD3U42A0SFW

Zebra 9ft (2.8m) RS232 Serial Cable - DB9 Female Connector - Coiled - Power Pin 9 - TxD on 2 - True Converter - Low Temp -30C

Zebra Connection cable, USB, shielded.

Length: 15 ft (4.6 m)

Supports 12 V power supply

Zebra 15ft (4.6m) Shielded Power Plus USB Cable - Straight - 12V

Zebra 7ft (2.13m) Straight Shielded USB Cable (Type A Connector, 12V) - Low Temp -30 (Freezer Rated)

Requires Power Supply (PWR-BGA12V50W0WW), DC Cable (CBL-DC-451A1-01) and country specific three-wire grounded (C13) AC Line Cord, all sold separately - Compatible with DS3608, LI3608, STB3678, FLB3678 (DS3678, LI3678)

Zebra 9ft (2.8m) Shielded USB Amphenol threaded circular connector Cable - Coiled - Low Temp -30C (Freezer Rated) - DS36xx to VC5090 or FLC9000 - Not capable of powering DS3608-ER, CBA-UF5-C09ZAR should be used instead - Cannot be used with full screen VC5090 computers that use an external keyboard, as the keyboard uses the rugged USB connector - Will charge a fully depleted battery in approximately 10.5hrs when connected to the 36xx cradle (STB3678 or FLB3678)

Zebra CABLE - USB, RS232 "Y" POWER STEALER, 9FT COILED, -30C

Zebra 9ft (2.8m) VC5000 or FLC9000 to DS3608-ER 'Y' Coiled Cable (USB) - Low Temp -30┬░C (Freezer Rated) - Provides USB communication between VC5090 or FLC9000 and scanner - Y Cable is designed to connect to either VC5090 COM1 or COM2 and USB A port or FLC9000 COM1 and USB port - When connecting to the FLC9000, USB host adapter (25-71915-01R) is required and the MC92 may need to be set to USB Host Mode - COM1 or COM2 port provides additional power needed for DS3608-ER, however an application (i.e. SerialWedge or DataWedge) must be used, to open the COM port before power will be applied to it

Zebra 3600 SERIES ETHERNET ADAPTER, STD TCP/IP, 24 VDC, RJ45, COMPATIBLE WITH 3600 SERIES

Power source required. Customer to supply 24 VDC source or order Zebra power supply PWR-BGA12V50W0WW & line cords CBL-DC-388A1-01 & 50-16000-219R

Eliminating third-party converter boxes and related equipment from the system removes a point of vulnerability on the network. When scanners are connected directly to the PLC it creates a more secure data capture environment.

3600 Series scanners can now connect directly to the PLC system which eliminates unnecessary networking equipment from the setup and reduces the risk of unplanned downtime due to process failure

Network Connect accommodates popular Industrial Ethernet Protocols so programmers don’t have to spend time making complex protocol conversion systems work. Seamlessly integrate Network Connect with a proprietary PLC and instantly remove the errors that can occur with an extra layer of third-party equipment on an industrial network.

Easy connection to PLC networks for all 3600 Series scanners

Purpose-built for the plant floor

12 Month Warranty

Zebra DC/DC Power Converter, 18-75VDC to 12VDC for VC6090, MC90XX, MC9190-G and MC9200 Forklift Cradle. incl. fused power cable. Use on electric forklifts with 24V, 36V and 48V batteries.It cannot be used with the VC6096

Power Supply :100-240 VAC,12VDC,4.16A

Power supply used with MC50, MC1000, four slot cradles and MC55, MC55A0, MC55A0-HC, MC70, MC75, MC3000, MC3100, MC90XX, MC9190-G, WT4000 and MC75A single slot cradles.