Accessories for Zebra DS3678-DP2F003VZWW

Zebra CABLE - USB, RS232 "Y" POWER STEALER, 9FT COILED, -30C

Zebra 9ft (2.8m) VC5000 or FLC9000 to DS3608-ER 'Y' Coiled Cable (USB) - Low Temp -30┬░C (Freezer Rated) - Provides USB communication between VC5090 or FLC9000 and scanner - Y Cable is designed to connect to either VC5090 COM1 or COM2 and USB A port or FLC9000 COM1 and USB port - When connecting to the FLC9000, USB host adapter (25-71915-01R) is required and the MC92 may need to be set to USB Host Mode - COM1 or COM2 port provides additional power needed for DS3608-ER, however an application (i.e. SerialWedge or DataWedge) must be used, to open the COM port before power will be applied to it

Zebra 12ft (3.66m) Coiled Shielded USB Cable (Type A Locking Connector for VC70) - Low Temp -30C (Freezer Rated) - USB cable locks onto VC70 using two screws - When connected to STB3678 or FLB3678, will charge a fully depleted battery in about 10 hours (provides 500 maH current to cradle) - Compatible with DS3608, LI3608, STB3678, FLB3678 (DS3678, LI3678)

Zebra 12ft (3.66m) Coiled Shielded USB Cable (Type A Connector) - High Current (USB Battery Charging BC 1.2) - Low Temp -30 (Freezer Rated) - Compatible with DS3608, LI3608, STB3678, FLB3678 (DS3678, LI3678)

Zebra Filter Adapter Cable For Use With 3600 Series U42 / UF0 Cable Assy, Dc Power Cord, 12Vdc, 1.5A, Use W/Stb & FLB3600

Zebra DC/DC Power Converter, 18-75VDC to 12VDC for VC6090, MC90XX, MC9190-G and MC9200 Forklift Cradle. incl. fused power cable. Use on electric forklifts with 24V, 36V and 48V batteries.It cannot be used with the VC6096

Power Supply :100-240 VAC,12VDC,4.16A

Power supply used with MC50, MC1000, four slot cradles and MC55, MC55A0, MC55A0-HC, MC70, MC75, MC3000, MC3100, MC90XX, MC9190-G, WT4000 and MC75A single slot cradles.