Accessories for Zebra WCMTB-T27B8ABE8-A6

Mobilis Universal breakaway shoulder strap + textile hook - 1 attachment point

This universal shoulder strap allows you to carry your handheld device and keep it always within reach, with or without a case.

It is equipped with a safety system that opens when the pulling force exceeds 7kg, so you can carry your terminal safely.

To attach the shoulder strap to the mobile terminal, simply pass the textile loop (arrow-shaped) through the notch at the bottom of the terminal or MOBILIS® case (download the data sheet and follow the installation instructions).

This textile ring is compatible with 99% of the terminals on the market and is detachable from the shoulder strap. The shoulder strap is also equipped with a removable foam shoulder strap.

Finally, you can adjust the length of the shoulder strap to fit your body and ensure optimal comfort.

• Universal shoulder strap with safety detachment system: opening at more than 7kg pull
• Can be used with or without a case
• Detachable textile ring of the shoulder strap
• High resistance strap (Polyester)
• Removable shoulder pad
• Adjustable length: 90 to 170 cm
• Width : 2.5 cm Length Textile ring : 7.5 cm
• Case / device not supplied

Mobilis Hard belt - 50 mm - Security Plastic Clip Buckle - 80 to 135 cm

This belt, 5 cm wide, is also adjustable between 80 and 135 cm thanks to velcro strips. Comfortable and robust, this belt closes with a clip buckle. It allows you to comfortably carry your holster or other accessory. This belt ensures stable support of your device placed in the holster. MOBILIS® accessories are designed to be compatible with this belt

• Comfortable and robust belt
• Ensures a solid support of your accessories
• Adjustable by velcro: from 80 to 135 cm
• Closing by plastic clip buckle

Mobilis Wrist mount - arm Band universal for smartphone and handheld device - 5 to 7”

With our wrist mount, never drop or break your smartphone or handheld device again by attaching it to your wrist or your arm. The devices are securely attached to the arm pouch thanks to silicon mounts. Thanks to its two Velcro straps it fits all body sizes and it can be easily adjusted to fit to your forearm. Therefore it can be attached and removed very quickly. You can use your smartphone or hhd device upright or sideways thaks to a rotating system that suits your needs.

• You can attach all 5 to 7” smartphones and data acquisition terminals to your wrist/arm
• Universal silicone mounting device
• Velcro-adjustable arm band to fit all wrist sizes
• A 360° rotating holder to use your device vertically or horizontally
• 2-year warranty

Each

Mobilis Holster for mobile computers & smartphones - Belt - Hands-free system - Size M 

This datacapture holster is designed to effortlessly store and carry your data acquisition terminal or smartphone. Your device is secured and held in place with an elastic flap closure. Its removable belt allows you to attach the holster to your waist and always keep it close at hand. With its stylus strap, you can have easy access to your pen or stylus whenever you need. Additionally, its front pocket means you can take an additional batttery, your smartphone or any other accessories. For maximum compatibility with your data acquisition terminals.

• Belt included
• Shoulder strap ring : compatible MOBILIS® shoulder strap : 001027 / 001025 / 001048
• 1 stylus/pen holder
• 1 front pocket for additional battery or other accessories
• An elastic closing flap strap stops the device from falling out while providing easy access to it
• Maximum device size : 9 x 19 x 4 cm
• Hard-wearing material (1680D polyester)
• 2-year warranty

Mobilis Basic Holster for mobile scanner & smartphone - Belt - Easy access system - Size S

This holster has been designed to store and transport your handheld computer. With the detachable belt that comes with the holster, you can keep your device close at hand while working with both hands free.

The holster is fitted with eyelets and can be attached to a forklift with clamps (not included) for convenience in the field. This case is equipped with a pen loop. To ensure effective protection and to fit all models of mobile scanners, payment devices and smartphones.

• Belt strap integrated (belt included)
• Stylus/pen holder
• Forklift mount compatible
• 2-year warranty

Each

Mobilis Basic Holster for mobile scanner & smartphone - Belt - Easy access system - Size M

Easier to carry and store your device, the design of this HHD makes everyday life effortless. This universal protective holster is equipped with a removable belt, which means you always have your HHD or smartphone within easy reach. Also, you’ll never waste time looking for your HHD or smartphone as you’ll always have it with you. To ensure complete protection and to be compatible with all HDD or smartphones, this holster comes in 2 different sizes.

• Includes a belt strap (belt included)
• 1 stylus/pen holder
• Forklift mount compatible (plastic cable ties not included)
• Maximum device size : 18 x 9 x 3 cm
• Hard-wearing material (1680D polyester)
• 2-year warranty

Mobilis Holster for Handheld device with pistol grip - Belt & leg strap - Size S

Designed to make storing and carrying your pistol grip device as easy as possible, this holster always keeps it within easy reach. Equipped with a removable belt, you can attach the holster wherever you want making it easy to access at all times. This holster has been designed to adapt to all work situations and to make your life easier. Thanks to its layout, this auto id holster is perfect for professional use.

• Holster for handheld devices with pistol grip
• Belt included : 2.5 cm wide
• Includes a leg strap Belt and leg
• belt included
• Integrated shoulder strap rings
• Forklift mount fixation (plastic cable ties not included)
• Hard-wearing material (1680D polyester)
• Size S : maximum handheld device dimensions : 18x9.5x5.5cm
• 2-year warranty

Each

Mobilis Holster for smartphone 6-7'' - With waist belt, belt loop & accessory pocket - Easy access system 

This holster was designed to store and transport your smartphone up to 6.5". Thanks to the removable belt, you can keep your smartphone within reach. You can also wear the holster with a shoulder strap (not included) thanks to the two rings provided for this purpose. It also has an accessory pocket and 2 pen loops.

• Includes a belt strap and integrated shoulder strap rings
• Belt strap with press stud for adjustable hight
• Belt included (maximum length : 137cm)
• 2 stylus/pen holders
• 1 front pocket for accessories
• Ergonomic shape for an easy pick-up
• Smarthpone maximum dimensions : 175x85x25mm
• Hard-wearing material (1680D polyester)
• 2-year warranty

Mobilis Screen protector for Zebra TC22 - TC27 - unbreakable & anti-shock IK06 - Clear finishing

Discover the MOBILIS®-designed tablet Clear screen protector; it effectively protects the screen of your terminal Zebra TC22 - TC27 against breakages, scratches, dust, etc. This screen protector is IK06 standard, has the best shockproof protection on the market, and its Clear finish retains 99% of the screen’s sharpness. It’s an easy to install, versatile and shatterproof screen protector. Thanks to its anti-bubble technology, installing your screen protector is no longer a problem. The product is also supplied with a cleaning kit, a microfibre cloth and a smoothing card to make installation as easy as possible. It also has perfect touch sensitivity. With its Clear protection, your terminal’s screen will be fully protected.

• Shockproof: IK06 standard & anti-scratch (5H hardness)
• Flexible & unbreakable screen protector
• Anti-microbial & oleophobic: repels water / grease and dirt
• Installation kit provided

Each

Mobilis Rugged protective case for Zebra TC22 - TC27 + handstrap - PROTECH

The ultra rugged case for Zebra TC22 and TC27 is designed to effectively protect your mobile computer device against shocks, scratches, dust and potential drops.

Zebra's TC22 and TC27 rugged case is made in France from high quality, impact resistant materials. The combination of these materials provides complete protection for your device while ensuring a comfortable and convenient grip for efficient work.

The Zebra TC22 TC27 case offers easy access to all ports, buttons and functions of the device, allowing you to use it easily, without having to remove the protective case. And that even during charging, since the case is fully compatible with both booted and non-booted Zebra Inserts/Shims.

If you're looking for a rugged protective case to extend the life of your Zebra TC22 or TC27 mobile computer, the MOBILIS Rugged Case is ideal. With its solid, practical design and easy access to all the functions of your TC22 and TC27, it offers a complete and efficient protection for your field users

• Flexible and light case specially designed for Zebra TC22 - TC27 mobile computers
• Drop-resistant: 40x greater than military standard MIL-STD 810G
• Air Cell System: Air cell on each of the 4 corners
• Capable of withstanding 1000 drops from a height of 1.2m
• Antimicrobial Protection - Certified by Sanitized® : Integrated technology which reduces microbes by up 99.9% in 24h
• Compatible with Zebra docking station : Single Slot (CRD-TC2L-BS1CO-01 / CRD-TC2L-BS11B-01 / CRD-TC2L-SE1ET-01) & Multi Slot Cradle (CRD-TC2L-SE5ET-01 / CRD-TC2L-BS5CO-01)
• Compatible Extended battery Zebra (BTRY-TC2L-3XMAXX-01)
• Stylus holder on the elastic strap
• Access to all ports and functionalities
• Made in France
• Case 30% recycled - 100% recyclable
• 2-year warranty

Mobilis Rugged protective case for Zebra TC22 - TC27 - PROTECH 

The ultra rugged case for Zebra TC22 and TC27 is designed to effectively protect your mobile computer device against shocks, scratches, dust and potential drops.

Zebra's TC22 and TC27 rugged case is made in France from high quality, impact resistant materials. The combination of these materials provides complete protection for your device while ensuring a comfortable and convenient grip for efficient work.

The Zebra TC22 TC27 case offers easy access to all ports, buttons and functions of the device, allowing you to use it easily, without having to remove the protective case. And that even during charging since the case is fully compatible with both booted and non-booted Zebra Inserts/Shims.

If you're looking for a rugged protective case to extend the life of your Zebra TC22 or TC27 mobile computer, the MOBILIS Rugged Case is ideal. With its solid, practical design and easy access to all the functions of your TC22 and TC27, it offers a complete and efficient protection for your field users.

• Flexible and light case specially designed for Zebra TC22 - TC27 mobile computers
• Drop-resistant: 40x greater than military standard MIL-STD 810G
• Air Cell System: Air cell on each of the 4 corners
• Capable of withstanding 1000 drops from a height of 1.2m
• Antimicrobial Protection - Certified by Sanitized® : Integrated technology which reduces microbes by up 99.9% in 24h
• Compatible with Zebra docking station : Single Slot (CRD-TC2L-BS1CO-01 / CRD-TC2L-BS11B-01 / CRD-TC2L-SE1ET-01) & Multi Slot Cradle (CRD-TC2L-SE5ET-01 / CRD-TC2L-BS5CO-01)
• Compatible Extended battery Zebra (BTRY-TC2L-3XMAXX-01)
• Stylus holder on the elastic strap
• Access to all ports and functionalities
• Made in France
• Case 30% recycled - 100% recyclable
• 2-year warranty

Zebra Micro USB to USB cable for single slot cradle communication

Micro USB active-sync cable. Allows for active-sync connectivity between the mobile computer single or two slot cradle and a host device. Also used to connect the MS4717 fixed mount imager to a USB host for communication.

Wrist Lanyard

Zebra UK AC line cord

• Length: 1.8m
• Three wire
• Grounded BS1363 plug
• Applicable with: Zebra power supplies
• UK

Zebra AC Line Cord, 1.8 m ungrounded, two wire, BS 1363 Plug - UK

For PWRS-14000-249R and Team Desktop Charger DCH6001

eConnex™ Adapter for TC22/TC27

Zebra TC73 - TC78 USB-C to 3.5mm Adapter Cable

Allows headsets with 3.5mm jack to be connected to TC73/TC78

Adapter provides PTT button, volume up/down buttons.
Adapter cable length is about 2.5ft. (78cm).
PTT button functionality tested with SKU# HDST-35MM-PTVP-02. Both the PTT button, the headset, and the adapter may be used.

Other headsets with a PTT button not listed may not work properly and their PTT button will not be detected.

Requires SKU# HDST-35MM-PTVP-02

Zebra rack/wall mounting bracket

Allows to install any single slot or multi slot cradle on a wall or a 19" IT rack. The bracket also allows to install up to four 4 slot spare battery chargers together on a wall or standard 19" IT rack.

Zebra PowerPrecision 3800 mAh Li-ion Battery with BLE Beacon for TC22/ TC27

Zebra TC22 / TC27 Standard PowerPrecision Li-ion Battery —3800mAh.

Premium-grade battery cells with longer lifecycle and tested to meet rigorous controls and standards.

Zebra TC22 / TC27 Extended PowerPrecision Li-ion Battery —5200 mAh

Premium-grade battery cells with longer lifecycle and tested to meetrigorous controls and standards.

Zebra DC line cord for PWR-BGA12V108W0WW

Zebra DC Line Cord

• Order separately: Power supply (PWR-BGA12V50W0WW)

Zebra 3.5MM JACK 43' (1.1M) STD CABLE ASSEMBLY

headset cable to connect to CBL-TC8X-AUDBJ-01

Zebra USB C to USB A cable with 90º bend in USB-C adapter

Zebra USB C cable - TC21, TC26, TC51, TC52, TC56, TC57 - USB-A to USB-C charging and communications cable

• Requires USB cigarette lighter adapter (CHG-AUTO-USB1-01) for charging in-vehicle

Zebra Connect Cradle for TC22/TC27

Allows to connect a mobile computer to an external monitor and multiple peripherals (hdmi, ethernet, 3.5mm and 4xusb-a). 

Order separately: Power supply (PWR-BGA12V50W0WW), DC Line Cord (CBL-DC-388A2-01) and country specific grounded AC Line Cord

Zebra single-slot charger plus battery charger - charges a single device and any TC22 / TC27 spare Li-Ion battery.

• Charges standard battery in device from 0 to 80% in less than 1 hour 20 minutes.
• Charges extended battery in device from 0 to 80% in less than 1 hour 50 minutes.
• Charges standard/extended spare battery from 0-90% in less than 4 hours.
• Compatible withTC22 / TC27 units with hand strap, trigger handle, or protective boot when shim is removed.

Includes: Shim for use with TC22 / TC27 without rugged boot. Remove the shim for compatibility with TC22 / TC27 with rugged boot / trigger handle.

Zebra single-slot charge-only cradle - charges a single device.

• Charges standard capacity battery from 0 to 80% in less than 1 hours 20 minutes.
• Charges Extended Capacity battery from 0 to 80% in less than 1 hours 50 minutes.
• Compatible withTC22 / TC27 units with hand straps, trigger handle or protective boot when shim is removed.

Includes: Shim for use with TC22 / TC27 without Rugged Boot. Remove the shim for compatibility with TC22 / TC27 with Rugged Boot / Trigger Handle.

Zebra charger - will charge up to five TC22 / TC27 devices.

• Charges Standard Capacity battery from 0 to 80% in less than 1hour 20 minutes.
• Charges Extended Capacity battery from 0 to 80% in less than 1hour 50 minutes.
• Compatible with TC22/ TC27 units with hand strap or trigger handle attached (and shim removed). Can be rack-mounted in a standard 19-inch server rack via mounting bracket SKU#BRKT-SCRD-SMRK-01.

Zebra single-slot charger and USB cradle - Charges a single device.

• Charges standard capacity battery from 0 to 80% in less than 1 hour 20 minutes.
• Charges extended capacity battery from 0 to 80% in less than 1hour 50 minutes.
• Compatible with TC22 / TC27 devices with hand straps, trigger handle or protective boot when shim is removed.

Includes:Shim for use with TC22 / TC27 without rugged boot. Remove the shim for compatibility with TC22 / TC27 with rugged boot / trigger handle.

To charge and sync using USB port with a computer, purchase USB cable 25-124330-01R.To connect to Ethernet, purchase USB-to-Ethernet module MOD-MT2-EU1-01 with bracket BRKT-TC51ENET1-02.

Zebra 5-Slot Ethernet Cradle

Allows network speeds up to 1Gbps. Connects to USB-C connector and 2-pin charge contacts on bottom of TC22/TC27. Will charge up to five TC22 / TC27 units. Compatible with TC22 / TC27 units with hand strap or trigger handle attached. Can be rack-mounted in a standard 19-inch server rack via mounting bracket BRKT-SCRD-SMRK-01.

• Charges Standard Capacity battery from 0 to 80% in less than 1 hour 20 minutes.
• Charges Extended Capacity battery from 0 to 80% in less than 1 hour 50 minutes.

Zebra Charge-only cradle adapters for TC22 / TC27 devices to be used with existing cradles designed for other devices.

Zebra Battery Charger Replacement Kit - 4 Slot

• 4-slot battery charger replacement cup. Used to replace a legacy TC21 / TC26 series 4-slot battery.

Charger on single-slot or multi-slot ShareCradlebase when migrating from TC21 / TC26 to TC22 / TC27. No more than one cup shall be installed on a multi-slot ShareCradlebase when converting with this 4-slot battery charger cup. Should replace the TC21/TC26 toaster cup in the same location on the ShareCradlebase, usually the left-most slot when facing the cradle.

Zebra Device Cradle Cup Replacement Kit

Kit allows the conversion of other devices' 5-slot charge-only ShareCradles purchased after 2019 to support TC22 / TC27.

• Only compatible with cradles that use ShareCradledesign.
• Kit includes five TC22 / TC27 ShareCradlecups.
• Not all five cups need to be used, therefore creating a multi-slot cradle supporting a mixed combination of devices (e.g. two TC22 / TC27 and three TC5X devices).

Zebra USB to Ethernet module kit

Connects a single-slot charge/USB charger to a local area network via Ethernet over USB.

• 10/100/1000 Mbps speed
• LEDs on module to indicate connectivity and speed
• Mechanical switch to choose micro-USB port or RJ45 Ethernet

Zebra power supply for 5 slot cradle - AC input: 100-240V, 2.8A, DC output: 12V, 9A, 108W

• Order separately: DC line cord CBL-DC-381A1-01, AC mains power cord

Zebra power supply - 12 VDC, 4,16 A for single slot cradle

• Requires: DC line cord (specific DC cord dependent on product) also AC line cord

Zebra wall charger - UK power supply

• Power supply 100-240 VAC, 5V, 2.5A with UK plug
• Order separately: Device connection cable (USB, type A)

Spare battery charger to charge any x4 Li-ion batteries.

• Standard and extended capacity batteries will charge from 0–90% in less than 4 hours.
• Can be used standalone or up to 4 chargers can be mounted on mounting bracket BRKT-SCRD-SMRK-01.

Zebra Replacement wrist strap – extended size

SKU# SG-NGWT-WSTPLN-01

Replacement wrist strap – extended size.

• Black dial and accent colour on strap identify size as extended (medium/large).
• Strap length can be adjusted between 164 to 265 mm (approx. 6.5 to 10.5").

Zebra Replacement wrist strap – standard size.

SKU# SG-NGWT-WSTPST-01

Replacement wrist strap – standard size.

• White dial and accent colour on strap identify size as standard (small/medium).
• Strap length can be adjusted between 128 to 191 mm (approx. 5.0 to 7.5").

Zebra Arm Mount, Medium.

Enables the TC22 / TC27 to be mounted to the arm for hands free operation.

• Mount allows TC22 / TC27 to function as a hands-free solution in combination with the RS5100 / RS6100 (or similar) ring scanner.
• Compatible with standard or extended capacity battery.
• Not compatible with rugged boot.

Includes: Medium sized (300mm) Velcro wrist strap SG-TC2L-ARMSTRAP01 and carrier comfort pad SG-TC2L-CMPD-01

Zebra Rotatable Arm Mount for TC22/TC27

With large (330 mm) velcro straps, supports device with either basic or extended battery (works without the boot)

Protective boot increases drop spec of device from 4 ft. to 5 ft. (1.5 m)

• Compatible with devices using standard or extended Capacity battery.
• Compatible with hand strap

Zebra soft holster.

Vertical orientation with open bucket design to accommodate TC22 / TC27 with optional trigger handle TRG-TC2L-SNP1-01.

• Compatible with rugged boot SG-TC2L-BOOT-01 and hand strap SG-TC2L-HSTRP1-01. Opening at bottom of holster for providing drainage and route for audio from device's speaker.
• Non-rotating for maximum durability.
• Compatible with devices using standard or extended capacity battery.

Strap attaches to back of TC22/TC27

• Leather and Hypalon Pad provides maximum comfort and wear resistance.
• Adjustable velcro design for various hand sizes.
• Not compatible with Snap-on accessories (trigger handle).
• Compatible with devices using standard or extended Capacity battery.

Zebra Screen Protector

• Tempered glass
• Includes: Alcohol wipes, cleaning cloth, and instructions needed for screen protector installation.

Zebra wrist mount with extended BOA dial-to-fit wrist strap.

Swivel design allows device to be viewed in portrait or landscape mode enabling hands-free functionality.

• Velcro-free design uses non-absorbent materials that can be wiped down.
• Strap length can be adjusted between 164 to 265mm (approx. 6.5 to 10.5")
• Not compatible with rugged boot.

Includes: Carrier, Comfort Pad SG-TC2L-CMPD-01and Medium/Large sized Wrist Strap SG-NGWT-WSTPLN-01

Pistol-grip trigger handle.

Uses electrical trigger via contacts on back side of TC22 / TC27.

• Trigger handle accessory offers customers the option of using the product in a gun form factor, ideal for scan-intensive operations.
• Does not block access to rear facing camera and flash allowing camera to be used while using the trigger handle.
• Compatible with both standard and extended capacity batteries.
• Not compatible with hand strap
• Requires rugged boot SG-TC2L-BOOT-01.

   

Mobilis Screen Protector Tempered Glass Clear - 9H- for Zebra TC22 - TC27 - HC20 - HC50

• Anti-scratch (9H hardness)
• Anti-shock : IK03 standard
• Clear finish
• Installation kit provided

Mobilis PROTECH - Case - Safety Green + Handstrap for Zebra TC22 - TC27 - Pantone 302C - Soft bag

• Drop-resistant: up to 1 000 drops from 1.5m/5ft.
• Zebra accessories compatible
• Hand strap included
• Recycled 30% & Recyclable 100%

Mobilis PROTECH - Case - Safety Orange + Handstrap for Zebra TC22 - TC27 - Pantone 021C - Soft bag

• Drop-resistant: up to 1 000 drops from 1.5m/5ft.
• Zebra accessories compatible
• Hand strap included
• Recycled 30% & Recyclable 100%

Mobilis PROTECH - Case for Zebra TC22 - TC27 - HC50 - HC20 Compatible Trigger - Softbag

• Drop-resistant: up to 1000 drops from 1.5m/5ft
• Trigger compatible
• Patented shock-resistant systems
• Recycled 30% & Recyclable 100%

Zebra DC 'Y' Line Cord for running two SAC-TC8X-4SCHG-01 battery chargers with a single Level VI power supply PWR-BGA12V108W0WW 

Replacement for 25-85993-01R

Zebra POS Connect Cradle for TC22/TC27

HDMI, Ethernet, 3x USB-A, 1x 24V Powered USB, 2x 12V Powered USB Ports, shims, 3.5 mm headset jack.

Order separately: Power supply and AC line cord

Zebra Device Cradle Cup Replacement Kit

Kit allows the conversion of other devices' 5-Slot Charge + Communication ShareCradles purchased after 2019 to support TC22 / TC27.

• Only compatible with cradles that use ShareCradledesign.
• Kit includes five TC22 / TC27 ShareCradlecups and shims.
• Not all five cups need to be used, therefore creating a multi-slot cradle supporting a mixed combination of devices (e.g., two TC22 / TC27 and three TC5X devices).

Zebra USB - Ethernet Adapter kit for ShareCradle single slot.

SKU# KT-TC51-ETH1-01

Connects single-slot charge/USB charger to a local area network via Ethernet over USB.

10/100/1000 Mbps speed with LEDs on module to indicate connectivity and speed.

Mechanical switch to choose micro-USB port or RJ45 Ethernet.

Includes: USB-Ethernet Module SKU# MOD-MT2-EU1-01 and support bracket SKU# BRKT-TC51-ENET1-01.

Zebra Medium (300mm) Velcro Wrist Strap TC22/ TC27 Arm Mount

Zebra Large (330mm) Velcro Wrist Strap TC22/ TC27 Arm Mount

Zebra Comfort Pad for TC22/TC27 Arm Mount

Mobilis Elastic Hand strap with stylus holder

• Hand strap to help hold and prevent your device from falling
• Adjustable length thanks to a velcro and elastic system
• Integrated stylus holder compatible with all types of stylus or pen thanks to a conical elastic loop Suitable for right- and left-handed use
• Width 2 cm - PROTECH cases compatible
• 1 year warranty
• Hull and pen not included