Accessories for Zebra VH10110110010A00

AC Line Cord - 1.8m, Grounded, NEMA 5-15P Plug Associated Countries Brazil & USA

Zebra Power Extension Cable DC, 6ft Waterproof

Zebra VC80, VH10 - VESA Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Can also be attached to Quick Release Mount Plate (MT4205) - RAM D-size (2.25"") ball connected to a 4.75"" square plate with 4x100mm holes and 4x75mm holes in each corner - includes 4x bolts, nuts and lock washers

Zebra VC80, VH10 - Round Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball - Uses smaller footprint than VESA Plate (MT3501)

Zebra VC80, VH10 - Clamp Base (2"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (2"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Clamp Base (3"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (3"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Quick Release Mount - Allows a dismount of the vehicle mount computer without the need for tools - Can be used alone or in combination with the Cantilever Mount Kit (MT1002) or Vesa Plate Base (MT3501) 

includes Quick Release Mount that attaches to the sides of the vehicle mount computer and Mounting Plate (MT4205) that attaches to forklift

Zebra VC80, VH10 - 4"" RAM Mount - Short Arm - RAM D-size (2.25"") ball

Zebra External Voltage Pre-Regulator - VC80, VH10 - 19-90V DC in, 15V DC out, 90W - Allows the installation of the vehicle mount computer on electric trucks with batteries greater than 48V 

Requires Power Supply Cable (CA1210) to connect to the vehicle power supply and Power Supply Extension Cable (CA1230) to connect to the VH10 or VC80, both sold separately

Zebra AC/DC Power Supply Kit - 100-240V AC, 12V DC, 6A, 72W - VC80, VH10

includes Power Supply (PWR-BGA12V72W0WW) and Power Cable Adapter (CA4000) 

Requires country specific three-wire grounded (C13) AC Line Cord sold separately

Zebra VH10 - Magnetic Mount for Narrowband Antenna - Allows Narrowband Antenna (9009801) to be mounted on the roof of a vehicle - SMA connector - 12ft cable

Zebra Antenna (Narrow Band 1/4 Wave 4 06-512 MHz 6 Inch NB)

Zebra VC80, VH10 - Rail Base (1-1/4"" to 1-7/8"" max. pipe diameter) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Rail Base (2"" to 2-1/2"" max. pipe diameter) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball

Zebra VH10, VC80 - Mounting Plate for the MT4200 Quick Release Mount

Zebra VC80, VH10 - Adapter Bracket for the 82xx series Quick Release Mount

Zebra VC80, VH10 - RAM Rectangular Base with RAM D-size (2.25"") ball - 2"" x 3"" base - Base will install directly on the back of the vehicle mount computer

Zebra Stylus and Stylus Holder - VC80, VH10