Accessories for Zebra TC78B1-3T1K6E2A8C-A6

Mobilis Wrist mount - arm Band universal for smartphone and handheld device - 5 to 7”

With our wrist mount, never drop or break your smartphone or handheld device again by attaching it to your wrist or your arm. The devices are securely attached to the arm pouch thanks to silicon mounts. Thanks to its two Velcro straps it fits all body sizes and it can be easily adjusted to fit to your forearm. Therefore it can be attached and removed very quickly. You can use your smartphone or hhd device upright or sideways thaks to a rotating system that suits your needs.

• You can attach all 5 to 7” smartphones and data acquisition terminals to your wrist/arm
• Universal silicone mounting device
• Velcro-adjustable arm band to fit all wrist sizes
• A 360° rotating holder to use your device vertically or horizontally
• 2-year warranty

Each

Mobilis Holster for mobile computers & smartphones - Belt - Hands-free system - Size M 

This datacapture holster is designed to effortlessly store and carry your data acquisition terminal or smartphone. Your device is secured and held in place with an elastic flap closure. Its removable belt allows you to attach the holster to your waist and always keep it close at hand. With its stylus strap, you can have easy access to your pen or stylus whenever you need. Additionally, its front pocket means you can take an additional batttery, your smartphone or any other accessories. For maximum compatibility with your data acquisition terminals.

• Belt included
• Shoulder strap ring : compatible MOBILIS® shoulder strap : 001027 / 001025 / 001048
• 1 stylus/pen holder
• 1 front pocket for additional battery or other accessories
• An elastic closing flap strap stops the device from falling out while providing easy access to it
• Maximum device size : 9 x 19 x 4 cm
• Hard-wearing material (1680D polyester)
• 2-year warranty

Mobilis Basic Holster for mobile scanner & smartphone - Belt - Easy access system - Size M

Easier to carry and store your device, the design of this HHD makes everyday life effortless. This universal protective holster is equipped with a removable belt, which means you always have your HHD or smartphone within easy reach. Also, you’ll never waste time looking for your HHD or smartphone as you’ll always have it with you. To ensure complete protection and to be compatible with all HDD or smartphones, this holster comes in 2 different sizes.

• Includes a belt strap (belt included)
• 1 stylus/pen holder
• Forklift mount compatible (plastic cable ties not included)
• Maximum device size : 18 x 9 x 3 cm
• Hard-wearing material (1680D polyester)
• 2-year warranty

Mobilis Holster for Handheld device with pistol grip - Belt & leg strap - Size S

Designed to make storing and carrying your pistol grip device as easy as possible, this holster always keeps it within easy reach. Equipped with a removable belt, you can attach the holster wherever you want making it easy to access at all times. This holster has been designed to adapt to all work situations and to make your life easier. Thanks to its layout, this auto id holster is perfect for professional use.

• Holster for handheld devices with pistol grip
• Belt included : 2.5 cm wide
• Includes a leg strap Belt and leg
• belt included
• Integrated shoulder strap rings
• Forklift mount fixation (plastic cable ties not included)
• Hard-wearing material (1680D polyester)
• Size S : maximum handheld device dimensions : 18x9.5x5.5cm
• 2-year warranty

Each

Mobilis Screen protector for Zebra TC53 - TC58 - TC73 - TC78

Discover the MOBILIS®-designed data acquisition terminal Clear screen protector; it effectively protects the screen of your Zebra TC53 - TC58 & TC73 - TC78 against breakages, scratches, dust, etc. This screen protector is IK06 standard, has the best shockproof protection on the market, and its Clear finish retains 99% of the screen’s sharpness. It’s an easy to install, versatile and shatterproof screen protector. Thanks to its anti-bubble technology, installing your screen protector is no longer a problem. The product is also supplied with a cleaning kit, a microfibre cloth and a smoothing card to make installation as easy as possible. It also has perfect touch sensitivity. With its Clear protection, your terminal’s screen will be fully protected.

• Shockproof: IK06 standard & anti-scratch (5H hardness)
• Flexible & unbreakable screen protector
• Anti-microbial & oleophobic: repels water / grease and dirt
• Installation kit provided

Zebra Micro USB to USB cable for single slot cradle communication

Micro USB active-sync cable. Allows for active-sync connectivity between the mobile computer single or two slot cradle and a host device. Also used to connect the MS4717 fixed mount imager to a USB host for communication.

Zebra UK AC line cord

• Length: 1.8m
• Three wire
• Grounded BS1363 plug
• Applicable with: Zebra power supplies
• UK

Zebra three wire AC line cord - EU

• Length: 1.8m
• Includes: CEE 7/7 plug
• EU

Zebra TC73 - TC78 USB-C to 3.5mm Adapter Cable

Allows headsets with 3.5mm jack to be connected to TC73/TC78

Adapter provides PTT button, volume up/down buttons.
Adapter cable length is about 2.5ft. (78cm).
PTT button functionality tested with SKU# HDST-35MM-PTVP-02. Both the PTT button, the headset, and the adapter may be used.

Other headsets with a PTT button not listed may not work properly and their PTT button will not be detected.

Requires SKU# HDST-35MM-PTVP-02

Zebra rack/wall mounting bracket

Allows to install any single slot or multi slot cradle on a wall or a 19" IT rack. The bracket also allows to install up to four 4 slot spare battery chargers together on a wall or standard 19" IT rack.

Zebra TC7x 4 Slot Battery Charger Conversion Kit

Can be used to replace a TC7x series battery charger cup on five-slot ShareCradles when upgrading to TC73 / TC78.

Zebra HS3100 SINGLE BATTERY

Zebra TC53 / TC58 / TC73 / TC78 Battery with PowerPrecision Plus

Standard capacity 4,400 mAh battery with PowerPrecision Plus

Premium-grade battery cells with longer lifecycle and tested to meet rigorous controls and standards.

Obtain advanced battery state of health information including charge level and battery age based on usage patterns.

Zebra BLE Battery with PowerPrecision Plus

Standard capacity 4,400 mAh battery with PowerPrecision Plus and BLE
beacon.
• Premium-grade battery cells with longer lifecycle and tested to meet rigorous controls and standards.
• Obtain advanced battery state of health information including charge level and battery age based on usage patterns.
• BLE beacon allows device with this battery to be located even if powered off using Zebra Device Tracker.
• Sold separately: Zebra Device Tracker licenses for either 1-year

SKU# SW-BLE-DT-SP-1YR or 3-years SKU# SW-BLE-DT-SP-3YR.

Zebra TC58 / TC78 4,400 mAh Wireless charging battery with PowerPrecision Plus

C58 Standard capacity 4,400 mAh battery with Wireless charging and PowerPrecision Plus.

Premium-grade battery cells with longer lifecycle and tested to meet rigorous controls and standards.

Obtain advanced battery state of health information including charge level and battery age based on usage patterns.

Works great with TC58 wireless charging vehicle cradle SKU# CRD-TC58-WCVC-01

Works great with TC78 wireless charging vehicle cradle SKU# CRD-TC78-WCVC-01.

Zebra TC53 / TC58 / TC73 / TC78 6,600 mAh Extended capacity battery with PowerPrecision Plus

Extended capacity 6,600 mAh battery with PowerPrecision Plus.

Premium-grade battery cells with longer lifecycle and tested to meet rigorous controls and standards.

Obtain advanced battery state of health information including charge level and battery age based on usage patterns.

Zebra DC line cord for PWR-BGA12V108W0WW

Zebra DC Line Cord

• Order separately: Power supply (PWR-BGA12V50W0WW)

Zebra DC line cord for connect cradle (workstation)

DC line cord powering the ET4X presentation stand or any connect cradle (workstation configurations only) from a level VI power supply PWR-BGA12V50W0WW

Zebra USB TYPE-A 36 (0.9M) CHRG AND COMM CBL

Zebra USB C to USB A cable with 90º bend in USB-C adapter

Zebra USB C cable - TC21, TC26, TC51, TC52, TC56, TC57 - USB-A to USB-C charging and communications cable

• Requires USB cigarette lighter adapter (CHG-AUTO-USB1-01) for charging in-vehicle

Zebra USB Vehicle Cigarette Lighter Adapter -

Includes two USB A ports (5V, 2.5A) for charging

Zebra TC73 - TC78 Single-slot Charger

Single-slot charge-only ShareCradle kit. Charges a single device and any TC73 / TC78 spare Li-ion battery.

Device with standard battery charges from 0–80% in about 1½ hours.

Includes: Power supply SKU# PWR-BGA12V50W0WW and DC cable SKU# CBL-DC-388A1-01.

Sold separately: Country-specific AC line cord

Zebra TC73 - TC78 Single-slot USB / Ethernet Capable Charger

Single-slot charge and USB ShareCradle kit. Charges a single device and any TC73 / TC78 spare Li-ion battery.

Device with standard battery charges from 0–80% in about 1½ hours.

Includes: Power supply SKU# PWR-BGA12V50W0WW and DC cable SKU# CBL-DC-388A1-01.

Sold separately: Country-specific AC line cord, micro-USB cable SKU# 25-124330-01R, and USB to Ethernet module kit SKU#MOD-MT2-EU1-01

Zebra TC73 - TC78 Five-slot Charger (4 x Device & 4 Batteries)

Charge-only ShareCradle kit to charge four devices and four spare Li-ion batteries.

Can be mounted in a standard 19-inch rack system using mounting bracket SKU# BRKT-SCRD-SMRK-01.

Device with standard battery charges from 0–80% in about 1½ hours.

Includes: Power supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01, and 4-pack of TC73 / TC78 inserts/shims.

Sold separately: Country-specific AC line cord

Zebra TC73 - TC78 Five-slot Charger

Charge-only ShareCradle kit to charge five devices.

Can be mounted in a standard 19-inch rack system using mounting bracket SKU# BRKT-SCRD-SMRK-01.

Device with standard battery charges from 0–80% in about 1½ hours.

Includes: Power supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01, and 5-pack of TC73 / TC78 inserts/shims.

Sold separately: Country-specific AC line cord

Zebra TC73 - TC78 Five-slot Ethernet Capable Charger

Five-slot charge/Ethernet ShareCradle kit. Charges five devices with network speeds of up to 1 Gbps.

Device with standard battery charges from 0–80% in about 1½ hours.

Includes: Power supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01 and 5-pack of TC73 / TC78 inserts/shims.

Sold separately: Country-specific AC line cord

Zebra TC78 Wireless Charger for Use in Vehicles

TC78 Wireless charger for vehicles.

Can be mounted using four AMPS-pattern holes.

Includes a holder for stylus that can be installed either to the left or right of device in cradle or removed.

Requires: TC78 device with wireless battery SKU# BTRY-NGTC5TC7-44MAWC-01. All sold separately.

For power and mounting options: see Vehicle Holders and Mounts

Zebra TC73 - TC78 Device Cradle Cup Replacement Kit

One TC73 / TC78 device cradle cup replacement kit. Can be used to replace a TC5x series device cup on ShareCradle when upgrading to TC73 / TC78.

Includes: Insert/shim.

Also available as a 5-pack — 5 device cradle cups and 5 inserts/shims — SKU# CRDCUP-NGTC7-05.

SHIM-CRD-NGTC7 Replacement inserts/shims for TC73 / TC78 ShareCradles.

Zebra TC73 - TC78 Device Cradle Cup Replacement Kit

One TC73 / TC78 device cradle cup replacement kit. Can be used to replace a TC5x series device cup on ShareCradle when upgrading to TC73 / TC78.

Includes: Insert/shim.

SHIM-CRD-NGTC7 Replacement inserts/shims for TC73 / TC78 ShareCradles.

Pack of 5

51T Charging Cradle Designed For:

• Zebra TC70
• Zebra TC75
• Zebra TC77

Features

• Detachable cable allows re-use of cig-plug or hardwired to vehicle
• Extra-long 1.8M coiled cable for van use. Plug at BOTH ends (Replaceable)
• LED Power Indicator
• Internal voltage regulator ensures consistent output voltages
• Internal voltage clamp and Internal auto-reset switch prevents over-voltage to device
• Cable hook prevents snagging & adds supporting strain relief
• Each screw fastens in to a precisely placed brass bolt, fixed during injection moulding for strength
• 6 locating bolts mount to supplied back place, for Suction Mount or Multi Bay Charger
• Multiple security bolts
• Charging pins tested to over 1 Million compression
• Internal auto-reset switch preventing short-circuit across pins
• 5.0V Out (Mini USB Type A output)
• Tamper-proof screws with anti-vibrate and shake-proof washers
• Steel chassis
• Interchangeable throughout our current 51T product range

Design

• Repairable / Replaceable parts
• Strong
• Made in the UK
• Customisable
• Designed in the UK
• Anti-vibration
• AC / DC - 12 / 24 / 240 Voltage
• Security bolts for strength and alignment
• Recyclable & Re-usable parts
• Designed specifically for the device
• Part of the Modular Family
• 5.0v USB mini out

• Order Separately: Power Supply
• Warranty: 3 Years

Zebra HS3100 headset, Bluetooth, NFC, IP67, noise immunity

Incl.: Headband, ear pad, windscreen, headband pad, temple pad, battery

fits for: Android devices

Zebra HS3100 rugged bluetooth headset (over-the-head headband)

includes HS3100 boom module (HS3100-BOOM-01) and HSX100 OTH headband module (KT-HS3X-OHEAD1-01)

Zebra HS3100 Rugged Wired Headset (Over-the-head headband)

includes HS3100 Shortened Boom Module and HSX100 OTH headband module

Zebra USB to Ethernet module kit

Connects a single-slot charge/USB charger to a local area network via Ethernet over USB.

• 10/100/1000 Mbps speed
• LEDs on module to indicate connectivity and speed
• Mechanical switch to choose micro-USB port or RJ45 Ethernet

Zebra power supply for 5 slot cradle - AC input: 100-240V, 2.8A, DC output: 12V, 9A, 108W

• Order separately: DC line cord CBL-DC-381A1-01, AC mains power cord

Zebra power supply - 12 VDC, 4,16 A for single slot cradle

• Requires: DC line cord (specific DC cord dependent on product) also AC line cord

Zebra wall charger - EU power supply

• Power supply 100-240 VAC, 5V, 2.5A with EU plug
• Order separately: Device connection cable (USB, type A)

Zebra wall charger - UK power supply

• Power supply 100-240 VAC, 5V, 2.5A with UK plug
• Order separately: Device connection cable (USB, type A)

Zebra RAM Twist Lock Suction Cup with Double Socket Arm and Diamond Base Adapter.

Overall Length: 6.75 inch, compatible with both charge and communication vehicle cradles.

Zebra RAM Diamond Ball Base with 1 inch Ball

Size: 2.43 x 1.31 inches

Zebra 8-Slot-Battery Charger - HS3100 - Charges up to eight HS3100 batteries - Requires Power Supply (PWR-BGA12V50W0WW), DC Cable (CBL-DC-388A1-01) and country specific three-wire grounded (C13) AC Line Cord, all sold separately

Zebra Battery charger

SKU# SAC-NGTC5TC7-4SCHG

Spare battery charger to charge any four spare Li-ion batteries.

Standard capacity 4,400 mAh batteries charge from 0–90 % in about 4 hours.

Sold separately: Power Supply SKU# PWR-BGA12V50W0WW, DC Cable SKU# CBL-DC-388A1-01 and Country-specific AC Line cord

4 spare battery chargers can be mounted as shown with mounting bracket SKU# BRKT-SCRD-SMRK-01 Use to mount to wall or with standard 19" server rack for more density and save space.

Zebra Hand straps

SKU# SG-NGTC5TC7-HDSTP-03

Hand strap – Pack of 3.

• Allows device to be easily held in palm of hand.
• Attaches directly to device, even with rugged boot installed.
• Includes loop for holding optional stylus.
• Sold separately: Rugged boot SKU# SG-NGTC5EXO1-01.

Zebra TC53 / TC58 / TC73 / TC78 Soft holster

Vertical orientation with open bucket design to accommodate TC53/TC58 / TC73 / TC78 with optional rugged boot, pistol-grip trigger handle, and/or hand strap.

Strap on rear of holster allows adjustment for use with the accessory options mentioned above.

Includes loop for storage of optional stylus. Non-rotating for maximum durability.

Holster is leather material and includes cut-out for speaker output.

Also compatible with trigger handle SKU# TRG-NGTC5-ELEC-01 and hand strap SKU# SG-NGTC5TC7-HDSTP-03.

Zebra Screen protector – pack of 3.

Tempered glass.

Includes alcohol wipes, cleaning cloth, and instructions needed for screen protector installation.

Zebra Wrist Lanyard

For use with Trigger Handle or Rugged Boot

Zebra Stylus

SKU# SG-STYLUS-TCX-MTL-03

Fiber tipped stylus – pack of 3.

• Heavy-duty and made from stainless steel / brass. No plastic parts, real pen feel. Can be used in rain.
• Micro-knit, hybrid-mesh, fiber tip provides silent, smooth gliding use. 5" length.
• Big improvement over rubber tipped or plastic tipped stylus.
• Compatible with all capacitive touch screen devices.
• Tether to device or hand strap using SKU# SG-TC5NGTC7NG-TETHR-03.

Zebra TC73 - TC78 Electronic Trigger Handle

Pistol-grip trigger handle.

Uses electrical trigger via contacts on back side of TC73/TC78.

Trigger handle accessory offers customers the option of using the product in a gun form factor, ideal for scan-intensive situations.

Does not block access to rear facing camera and flash allowing camera to be used while using the trigger handle.

Compatible with both standard and extended capacity batteries.

Sold separately: Optional wrist strap SKU# SG-PD40-WLD1-01.

Zebra Vehicle mounting hardware

SKU# 3PTY-PCLIP-241478

ProClip forklift/vehicle cradle clamp mount – for square frame
mounting.

• Attaches to square bars of vehicles/forklifts.
• Clamp is 5.125" x 3.75" and can accommodate bars of varying thicknesses.
• 6" long arm on clamp uses AMPS hole pattern for mounting ProClip cradles like SKU# 3PTY-PCLIP-241475

Zebra TC73 - TC78 Wired Charger for Use in Vehicles 

Non-locking powered vehicle charger with pogo pins.

Ruggedized pogo pin contacts for device charging.

1.25m long DC barrel connector cable.

Compatible with B and C size RAM® 2-hole diamond bases.

Sold separately: Power Cables SKU# 3PTY-RAM-GDS-CHARGE-M55-V8BU or SKU# 3PTY-RAM-GDS-CHARGE-M55-V7B1U, and mount SKU# RAM-B-166U.

Also available as a locking-version — SKU# 3PTY-RAM-HOL-ZE17L-1U.

Zebra TC73 - TC78 Locking Wired Charger for Use in Vehicles 

Non-locking powered vehicle charger with pogo pins.

Ruggedized pogo pin contacts for device charging.

1.25m long DC barrel connector cable.

Compatible with B and C size RAM® 2-hole diamond bases.

Sold separately: Power Cables SKU# 3PTY-RAM-GDS-CHARGE-M55-V8BU or SKU# 3PTY-RAM-GDS-CHARGE-M55-V7B1U, and mount SKU# RAM-B-166U.

Zebra HS3100 BATTERY PACK OF 8

Zebra DC 'Y' Line Cord for running two SAC-TC8X-4SCHG-01 battery chargers with a single Level VI power supply PWR-BGA12V108W0WW 

Replacement for 25-85993-01R

ZEBRA TC73, TC78 Connect Cradle (Workstation)

Allows to connect a mobile computer to an external monitor and multiple peripherals, includes HDMI, Ethernet and USB-A (x4) ports.

Requires mobile computer, power supply PWR-BGA12V50W0WW, DC Line Cord CBL-DC-388A2-01 and country specific grounded AC Line Cord sold separately

Requires Zebra Workstation Connect Application

Zebra TC73 - TC78 Vehicle Holder

Non-powered vehicle holder.

Holds device in vehicle installations.

Spring tension on holder, so does not support Pistol Grip Handle.

Compatible with B and C size RAM® 2-hole diamond bases.

Provides access to USB-C port on bottom of device allowing device to be charged.

Available for mounting using SKU# RAM-B-166U.

Zebra PTT and VoIP Headset with 3.5mm Locking Jack

For Push-To-Talk (PTT) and VoIP telephony. Compatible with PTT Express/PTT Pro.

Built-in cord wrap with rotating earpiece allows for right or left ear configuration. Mono headset with microphone.

Includes clip for attaching PTT button to clothing.

Sold separately: Requires USB-C to 3.5mm adapter cable SKU# ADP-USBC-35MM1-01

Zebra Wired headsets for Workforce Connect - USB-C

SKU# HDST-USBC-PTT1-01

PTT headset with USB-C connector one-piece solution.

• For Push-To-Talk (PTT) applications with volume up/volume down/PTT buttons. Compatible with PTT Express/PTT Pro.
• Rotating earpiece allows for right or left ear configuration. Mono headset with microphone.
• Includes clip for attaching PTT button to clothing.

Zebra TC73 / TC78, ET6x Stylus tether

• Can be attached to device tower bar.
• When hand strap is used, tether should attach to hand strap SKU# SG-NGTC5TC7-HDSTP-03 directly (not to terminal towel bar).
• String type tether prevents loss of stylus.

NOTE: Other Zebra coiled tethers are not recommended for use with TC73/TC78 as they may interfere with other accessories.

Zebra Replacement inserts/shims for TC73 / TC78 ShareCradles

51T T Stylus with Tether Designed for Zebra TC7X Series

• Coiled Tether for Added Reach