Accessories for Zebra TC75 Rugged Android Touch Computer

Mobilis Wrist mount - arm Band universal for smartphone and handheld device - 5 to 7”

With our wrist mount, never drop or break your smartphone or handheld device again by attaching it to your wrist or your arm. The devices are securely attached to the arm pouch thanks to silicon mounts. Thanks to its two Velcro straps it fits all body sizes and it can be easily adjusted to fit to your forearm. Therefore it can be attached and removed very quickly. You can use your smartphone or hhd device upright or sideways thaks to a rotating system that suits your needs.

• You can attach all 5 to 7” smartphones and data acquisition terminals to your wrist/arm
• Universal silicone mounting device
• Velcro-adjustable arm band to fit all wrist sizes
• A 360° rotating holder to use your device vertically or horizontally
• 2-year warranty

Each

• 001041 - Sleeve for Wearable Wristmount - Washable - Large
• 001040 - Sleeve for Wearable Wristmount - Washable - Medium

Mobilis Holster for mobile computers & smartphones - Belt - Hands-free system - Size M 

This datacapture holster is designed to effortlessly store and carry your data acquisition terminal or smartphone. Your device is secured and held in place with an elastic flap closure. Its removable belt allows you to attach the holster to your waist and always keep it close at hand. With its stylus strap, you can have easy access to your pen or stylus whenever you need. Additionally, its front pocket means you can take an additional batttery, your smartphone or any other accessories. For maximum compatibility with your data acquisition terminals.

• Belt included
• Shoulder strap ring : compatible MOBILIS® shoulder strap : 001027 / 001025 / 001048
• 1 stylus/pen holder
• 1 front pocket for additional battery or other accessories
• An elastic closing flap strap stops the device from falling out while providing easy access to it
• Maximum device size : 9 x 19 x 4 cm
• Hard-wearing material (1680D polyester)
• 2-year warranty

• 001027 - Secure Transport Shoulder Strap
• 001025 - Shoulder strap ergonomic with neck - shoulder pad
• 001048 - Basic shoulder strap with 4 soft rings

Mobilis Basic Holster for mobile scanner & smartphone - Belt - Easy access system - Size M

Easier to carry and store your device, the design of this HHD makes everyday life effortless. This universal protective holster is equipped with a removable belt, which means you always have your HHD or smartphone within easy reach. Also, you’ll never waste time looking for your HHD or smartphone as you’ll always have it with you. To ensure complete protection and to be compatible with all HDD or smartphones, this holster comes in 2 different sizes.

• Includes a belt strap (belt included)
• 1 stylus/pen holder
• Forklift mount compatible (plastic cable ties not included)
• Maximum device size : 18 x 9 x 3 cm
• Hard-wearing material (1680D polyester)
• 2-year warranty

Mobilis Holster for Handheld device with pistol grip - Belt & leg strap - Size S

Designed to make storing and carrying your pistol grip device as easy as possible, this holster always keeps it within easy reach. Equipped with a removable belt, you can attach the holster wherever you want making it easy to access at all times. This holster has been designed to adapt to all work situations and to make your life easier. Thanks to its layout, this auto id holster is perfect for professional use.

• Holster for handheld devices with pistol grip
• Belt included : 2.5 cm wide
• Includes a leg strap Belt and leg
• belt included
• Integrated shoulder strap rings
• Forklift mount fixation (plastic cable ties not included)
• Hard-wearing material (1680D polyester)
• Size S : maximum handheld device dimensions : 18x9.5x5.5cm
• 2-year warranty

Each

Mobilis Screen protector unbreakable anti-shock IK06 Clear finishing for Zebra TC70 - TC72 - TC75 - TC77

Discover the MOBILIS®-designed data acquisition terminal Clear screen protector; it effectively protects the screen of your Zebra TC 70/72/75/77 against breakages, scratches, dust, etc. This screen protector is IK06 standard, has the best shockproof protection on the market, and its Clear finish retains 99% of the screen’s sharpness. It’s an easy to install, versatile and shatterproof screen protector. Thanks to its anti-bubble technology, installing your screen protector is no longer a problem. The product is also supplied with a cleaning kit, a microfibre cloth and a smoothing card to make installation as easy as possible. It also has perfect touch sensitivity. With its Clear protection, your terminal’s screen will be fully protected.

• Anti-Shock: IK06 standard (best anti-shock protection on the market)
• Anti-Scratch (5H hardness)
• Flexible unbreakable screen protector
• Clear finish: increased visual clarity
• Anti-microbial: eliminates 99% of microbes in less than 24 hours
• Oleophobic: repels water / grease and dirt
• Quick and easy to install - bubble-free
• Installation kit provided (cleaning wipes/microfibre cloth/dust protection/smoothing card)
• Perfect touch sensitivity (0.33 mm thickness)
• Compatible with the MOBILIS® capacitive stylus
• 2-year warranty

Mobilis Activ + Pack protective case for Zebra TC70 - TC72 - TC75 - TC77

• Dedicated reinforced protective case
• Designed for intensive use onsite
• Drop-resistant: 15x greater than military standard MIL-STD 810G; capable of withstanding 400 drops from a height of 1.2m
• Perimetric Bumper: Reinforced protection with a patented system for absorbing shocks
• TFP 4.0 anti-shocks composite: Cushion shock; absorb shock waves and withstand impacts
• Washable material
• Shoulder strap included : attachment rings in braided nylon resistant to a 15kg traction per ring
• Elastic hand strap
• Universal stylus holder
• Access to all ports and functionalities
• 2-year warranty

Zebra TC70/75 FORKLIFT CRADLE w/ 2" GRILL MNT

Zebra UK AC line cord

• Length: 1.8m
• Three wire
• Grounded BS1363 plug
• Applicable with: Zebra power supplies
• UK

Zebra three wire AC line cord - EU

• Length: 1.8m
• Includes: CEE 7/7 plug
• EU

Zebra AC Line Cord, 1.8 m ungrounded, two wire, BS 1363 Plug - UK

For PWRS-14000-249R and Team Desktop Charger DCH6001

Zebra DC Line Cord

Headsets sold seperately.

Zebra rack/wall mounting bracket

Allows to install any single slot or multi slot cradle on a wall or a 19" IT rack. The bracket also allows to install up to four 4 slot spare battery chargers together on a wall or standard 19" IT rack.

Zebra 4620 mAh Li-ON PowerPrecision Battery

Single Pack

Pack of 10 Batteries

Zebra PowerPrecision 4620 mAh Battery - 1 Pack - TC70, TC75 - for use only on TC700H, TC700J, TC75AH and TC75BH configurations

Zebra TC70 / TC75 4620mAh Li-Ion PowerPrecision Battery - 10 Pack - for use only on TC700H, TC700J, TC75AH and TC75BH configurations

Zebra spare battery Li-Ion, fits for: TC7X

Zebra PowerPrecision+ 4620 mAh Battery - 10 Pack - TC70x, TC75x

for use only on TC700K, TC75EK, TC75FK and TC75GK configurations

Zebra DC Line Cord

• Order separately: Power supply (PWR-BGA12V50W0WW)

Zebra Snap-On USB/Charge Cable

Connects to the I/O connectors on the rear of TC70 / TC75.

Snap-On USB/Charge Cable. For charging, PWR-BUA5V16W0WW, DC cable CBL-DC-383A1-01 and Country Specific sold separately

• PWR-BUA5V16W0WW - Level VI AC/DC Power Supply (Brick)
• CBL-DC-383A1-01 - DC Line Cord for connecting a Level VI Power Supply
• 50-16000-670R - Two Wire AC Line Cord - UK
• 50-16000-255R - Two Wire AC line cord - EU

CLA (Cigarette Light Adapter) Auto Charge Cable for The TC75 Vehicle Cradle

Does not work without Cradle which can be found in accessories.

Allows for installation into Vehicle's fuse box.

Does not work without Cradle which can be found in accessories.

Charging Cable Cup

Snaps onto the bottom of TC70/TC75, allowing you to charge the TC70/TC75 while another accessory is attached.

TC7X Charging Cable Cup. Requires PWR-BUA5V16W0WW, DC Cable CBL-DC-383A1-01 and Country specific AC Line Cord sold separately

• PWR-BUA5V16W0WW - Level VI AC/DC Power Supply (Brick)
• CBL-DC-383A1-01 - DC Line Cord for connecting a Level VI Power Supply
• 50-16000-670R - Two Wire AC Line Cord - UK
• 50-16000-255R - Two Wire AC line cord - EU

Zebra TC70/TC75 Auto Charging Cable Cup

Snaps onto the bottom of TC70/TC75, allowing the users to charge their TC70/TC75 via a Vehicle's Cigarette Light Adapter (CLA).

• CHG-AUTO-HWIRE1-01 - Hardwire Auto Charge Cable
• CHG-AUTO-CLA1-01 - CLA Auto Charge Cable

Zebra TC70/TC75 Charge Only Vehicle Cradle

Supports snap on TC70/TC75 accessories excluding the Trigger Handle.

Power Supplies (CHG-AUTO-CLA1-01 or CHG-AUTO-HWIRE1-01) and Optional Windshield Mounting Hardware are sold separately and can be found in accessories.

• CHG-AUTO-CLA1-01 - CLA Auto Charge Cable
• CHG-AUTO-HWIRE1-01 - Hardwire Auto Charge Cable

Zebra 2-Slot Charge/USB/Ethernet ShareCradle for two TC7X terminals - TC70, TC75 - Requires Power Supply (PWR-BGA12V50W0WW), DC Cable (CBL-DC-388A1-01) and country specific three-wire grounded (C13) AC Line Cord, all sold separately

Fits 1 x TC70/TC75 and 1 x spare battery

Fits 1 x TC70/TC75 and 1 x spare battery

Zebra TC70/TC75 5 Slot Charge Only ShareCradle

TC7X 5-Slot Charge-Only Cradle for 5x TC7Xs or 4x TC7Xs 4x spare batteries off of one power supply via Adapter Cup sold separately. PWR-BGA12V108W0WW, country specific AC line cord and DC Line Cord CBL-DC-382A1-01 (Cords and Power Supplies Sold Separately)

• PWR-BGA12V108W0WW - Power Supply
• CBL-DC-382A1-01 - DC line cord
• 50-16000-219R - AC Line Cord - UK
• 50-16000-220R - AC Line Cord - EU

Zebra TC70/TC75 5 Slot Ethernet ShareCradle

TC7X 5-Slot Ethernet Cradle for 5x TC7Xs or 4x TC7Xs 4x spare batteries off of one power supply via Adapter Cup sold separately. PWR-BGA12V108W0WW, country specific AC line cord and DC Line Cord CBL-DC-382A1-01 (Cords and Power Supplies Sold Separately)

• PWR-BGA12V108W0WW - Power Supply
• CBL-DC-382A1-01 - DC line cord
• 50-16000-219R - AC Line Cord - UK
• 50-16000-220R - AC Line Cord - EU

Zebra ShareCradle 4 Slot Battery Charger Adapter Cup

Allows for a TC70/TC75 4-Slot Battery Charger to be charged and docked on the 5-Slot ShareCradles.

Zebra 2.5 mm Headset for PTT and VoIP with rotating ear piece for right/left ear wearing and built in cord wrap.

EC30 Requires - 2.5mm Female to 3.5mm Male Headset Adapter Cable (CBL-TC51-HDST25-01)

Works with the TC7x Cradle

Reads Tracks 1, 2, & 3. Offers Point-to-point encryption (P2PE) with Encryption for Tracks 1, 2, and 3, supporting TDES/DUKPT and AES/DUKPT.

Compatible with hand strap, Charge-Only Cradles and Charging Cable Cups. Not compatible with other accessories.

Zebra power supply - 12 VDC, 4,16 A for single slot cradle

• Requires: DC line cord (specific DC cord dependant on product) also AC line cord

• CBL-DC-388A1-01 - DC Line Cord
• CBL-DC-382A1-01 - DC line cord
• CBL-DC-451A1-01 - DC line cord with filter
• CBL-DC-379A1-01 - DC Y Line Cord
• CBL-DC-375A1-01 - DC Line Cord
• 50-16000-219R - AC Line Cord - UK
• 50-16000-220R - AC Line Cord - EU

Power Supply :100-240 VAC,12VDC,4.16A

Power supply used with MC50, MC1000, four slot cradles and MC55, MC55A0, MC55A0-HC, MC70, MC75, MC3000, MC3100, MC90XX, MC9190-G, WT4000 and MC75A single slot cradles.

Zebra Power Supply 100-240VAC,12VDC,9A

Power supply for charge only- and ethernet cradles

Order separately: DC-cable (50-16002-029R), power cord

Power Supply: 100-240VAC, 5.4 VDC, 3A

Power supply used with MC50, MC1000 Single Slot Cradles and MC55, MC55A0, MC55A0-HC MC70, MC75, MC1000, MC3000 and MC3100 Cable Chargers.

Zebra RAM Twist Lock Suction Cup with Double Socket Arm and Diamond Base Adapter.

Overall Length: 6.75 inch, compatible with both charge and communication vehicle cradles.

Zebra RAM Diamond Ball Base with 1 inch Ball

Size: 2.43 x 1.31 inches

Zebra Premium Rugged Headset

Optimized for voice-directed applications and voice Communication for workers in harsh environments. Requires QD to 2.5 mm adapter or QD to 3.5mm adapter

TC70/TC75 Drop in style 4-Slot Battery Charger with LEDs to indicate Charge State.

Can be docked and powered in the 5-Slot Cradle via adapter cup (sold separately) or used standalone. When used stand-alone requires Power Supply (PWRS-14000-148R) and AC line cord all of which are available in accessories.

Made of leather and hypalon, this adjustable hand strap provides comfort to support a wide range of hand sizes whiles resisting wear in rugged environments. The hand strap also provides a loop and tether point for the optional stylus. Plastic clip latches into terminal for easy insertion and removal.

Zebra TC70/TC75 Rigid Holster with snap in Design

Rotating Belt Clip with ability to insert in either direction. Compatible with Snap-on Accessories excluding the Trigger Handle.

Zebra Stylus with Coiled tether - 3 pack

Made of conductive carbon filled plastic material, optimised for enterprise durability.

Zebra Snap-On Trigger Handle

Easily attaches to bottom housing and easily removed to access battery.

Compatible with the Charge-Only 5-Slot & 2-Slot ShareCradles or Charging Cable Cup. The trigger handle includes a wrist tether that is attached to the trigger and the bottom housing of the device.