Accessories for Zebra RS51B0-TBBHWR

Zebra UK AC line cord

• Length: 1.8m
• Three wire
• Grounded BS1363 plug
• Applicable with: Zebra power supplies
• UK

Zebra three wire AC line cord - EU

• Length: 1.8m
• Includes: CEE 7/7 plug
• EU

Zebra rack/wall mounting bracket

Allows to install any single slot or multi slot cradle on a wall or a 19" IT rack. The bracket also allows to install up to four 4 slot spare battery chargers together on a wall or standard 19" IT rack.

Zebra RS5100 / RS6100 Spare Battery 480 mAh

Lithium Ion battery, 480 mAh. PowerPrecision+ advanced battery technology, provides higher level of intelligence on battery state of charge and state of health.

Single Battery

Zebra RS5100 / RS6100 Spare Battery 735 mAh

Lithium Ion battery, extended capacity 735 mAh. PowerPrecision+ advanced battery technology.
Provides longer run time than standard battery and cold operation to -30 oC.

Single Battery

Zebra RS5100 / RS6100 Spare Battery 735 mAh

Lithium Ion battery, extended capacity 735 mAh. PowerPrecision+ advanced battery technology.
Provides longer run time than standard battery and cold operation to -30 oC.

Pack of 10

Zebra DC line cord for PWR-BGA12V108W0WW

Zebra DC Line Cord

• Order separately: Power supply (PWR-BGA12V50W0WW)

Zebra RS5100 / RS6100 Corded Adapter with USB-C connector for TC21, TC26, TC53 and TC58. Terminal Supplies Power to Scanner, Communication via Bluetooth.

Replaces battery in RS5100 or RS6100

Zebra RS5100 / RS6100 Corded Adapter for WT6000 and WT6300

RS5100 / RS6100 Corded Adapter for WT6000 and WT6300, Terminal Supplies Power to Scanner, Communication via Bluetooth.

Replaces battery in RS5100 or RS6100.

Zebra RS5100 20-Slot Ring Scanner Cradle

20 slot cradle, charges twenty RS5100 ring scanners. LEDs on the RS5100 indicate charge status of each ring scanner.

Zebra RS5100 Four Slot Ring Scanner Cradle

Four slot charge-only cradle, charges four RS5100 ring scanners. LEDs on the RS5100 indicate charge status of each ring scanner.

Zebra power supply for 5 slot cradle - AC input: 100-240V, 2.8A, DC output: 12V, 9A, 108W

• Order separately: DC line cord CBL-DC-381A1-01, AC mains power cord

Zebra power supply - 12 VDC, 4,16 A for single slot cradle

• Requires: DC line cord (specific DC cord dependent on product) also AC line cord

Zebra RS5100 / RS6100 40-Slot Battery Charger

40 slot spare battery charger, charges forty RS5100 batteries. LEDs on the cradle indicate charge status of each battery

Zebra RS5100 / RS6100 Eight Slot Battery Charger

Eight slot spare battery charger, charges eight RS5100 batteries. LEDs on the cradle indicate charge status of each battery.

Zebra Spare Hand Strap for Back of Hand mount for RS6100 and RS5100

Zebra RS5100 / RS6100 replacement comfort pads

To be used with single sided trigger

Pack of 5

Zebra Retractor with Magnetic Recoil

For Use with Lanyard Trigger, Includes Adjustable Cord for Wearing Around the Neck

Allows lanyard to be worn around the neck or on the hip

Zebra RS5100 / RS6100 Double Trigger

• Designed for use in less aggressive use cases in retail, warehouse and manufacturing
• Ambidextrous, for right and left hand mounting without removal or rotation.
• Cannot be worn over heavy gloves
• Long trigger lifecycle (millions of presses)

Zebra RS5100 / RS6100 Double Trigger with USB-C

Charge battery using a USB-C cable without the use of a charge cradle.

Zebra RS5100 / RS6100 Double Trigger with Vibration

Provides the user with haptic feedback while scanning

Zebra RS5100 / RS6100 Single Trigger

• Intended for use in aggressive environments in warehouse and manufacturing
• Long trigger lifecycle (2+ million presses).
• Remove and rotate for left and right hand mounting
• Can be worn over heavy work glove

Zebra RS5100 / RS6100 Back of Hand Mount

• Mount is NOT a glove. Can be worn without gloves or over standard, low-cost gloves.
• Durable materials which resist wear – only the strap is fabric.
• Long trigger lifecycle (millions of presses).
• One-size-fits-all and ambidextrous, so customers don’t need to buy right / left hand and small / medium / large versions.
• Allows swapping of spare batteries for back to back shifts

Zebra RS5100 / RS6100 Low Temp Back of Hand Mount

• Mount is designed for use with RS6100 in freezer operations, down to -30oC / -22oF or for RS5100 in cooler operations, down to -20oC / -4oF
• Hand strap fits over heavy freezer gloves and mittens
• Mount ships with small size finger strap, intended for mounting trigger on index finger
• Spare straps: small (one finger), medium (two fingers), extra large (full hand/mitten)

Zebra RS5100 / RS6100 Lanyard Trigger

Single, large trigger button for handheld scanning, compatible with RS6100 and RS5100

Zebra WS50 Left Hand Wrap - Medium

Replaces the fabric hand wrap that is included with WS50 units configured as Back of Hand use.

Colour of stitching on Hand Wrap indicates size:

Blue = Large
Black = Medium
White = Small

NOTE: Hand Wrap is identical to RS5100 / RS6100 Hand Wrap for Enterprise Hand Mount and can be freely interchanged (i.e. SG-WEAR-HNWPRL-01 is the same as SG-RS51-HNWPRL-01)

Zebra WS50 Left Hand Wrap - Small

Replaces the fabric hand wrap that is included with WS50 units configured as Back of Hand use.

Colour of stitching on Hand Wrap indicates size:

Blue = Large
Black = Medium
White = Small

NOTE: Hand Wrap is identical to RS5100 / RS6100 Hand Wrap for Enterprise Hand Mount and can be freely interchanged (i.e. SG-WEAR-HNWPRL-01 is the same as SG-RS51-HNWPRL-01)

Zebra WS50 Right Hand Wrap - Medium

Replaces the fabric hand wrap that is included with WS50 units configured as Back of Hand use.

Colour of stitching on Hand Wrap indicates size:

Blue = Large
Black = Medium
White = Small

NOTE: Hand Wrap is identical to RS5100 / RS6100 Hand Wrap for Enterprise Hand Mount and can be freely interchanged (i.e. SG-WEAR-HNWPRL-01 is the same as SG-RS51-HNWPRL-01)

Zebra RS5100 / RS6100 spare nylon finger straps single sided trigger

Pack of 10

Zebra RS6100 / RS5100 Enterprise Hand Mount

• Small, medium and large sizes, in left and right hand, for a custom fit for every worker
• Mount is designed for use with RS6100 and RS5100
• Mount (SG-RS5X6-HNMT-01) and hand wrap (SG-WEAR-HNWPxx-01) sold separately

Zebra WS50 Left Hand Wrap - Large

Replaces the fabric hand wrap that is included with WS50 units configured as Back of Hand use.

Colour of stitching on Hand Wrap indicates size:

Blue = Large
Black = Medium
White = Small

NOTE: Hand Wrap is identical to RS5100 / RS6100 Hand Wrap for Enterprise Hand Mount and can be freely interchanged (i.e. SG-WEAR-HNWPRL-01 is the same as SG-RS51-HNWPRL-01)

Zebra WS50 Right Hand Wrap - Large

Replaces the fabric hand wrap that is included with WS50 units configured as Back of Hand use.

Colour of stitching on Hand Wrap indicates size:

Blue = Large
Black = Medium
White = Small

NOTE: Hand Wrap is identical to RS5100 / RS6100 Hand Wrap for Enterprise Hand Mount and can be freely interchanged (i.e. SG-WEAR-HNWPRL-01 is the same as SG-RS51-HNWPRL-01)

Zebra Right Hand Wrap - Small

Replaces the fabric hand wrap that is included with WS50 units configured as Back of Hand use.

Colour of stitching on Hand Wrap indicates size:

Blue = Large
Black = Medium
White = Small

NOTE: Hand Wrap is identical to RS5100 / RS6100 Hand Wrap for Enterprise Hand Mount and can be freely interchanged (i.e. SG-WEAR-HNWPRL-01 is the same as SG-RS51-HNWPRL-01)

Zebra RS5100 replacement trigger assembly, single sided trigger.

Includes comfort pad and nylon strap.