Accessories for Zebra MC345B-3S1J54SS-A6

Mobilis Screen Protector Anti-Shock IK06 - Clear for Zebra MC3400 - MC3450

• Shockproof: IK06 standard & anti-scratch (5H hardness)
• Flexible & unbreakable screen protector
• Anti-microbial & oleophobic: repels water / grease and dirt
• Installation kit provided

Mobilis Activ + Case for Zebra MC3400 - MC3450 Compatible Gun + Shoulder Strap

• Dedicated reinforced protective case
• Drop-resistant: up to 400 drops from a height of 1.2m
• Patented shock-resistant systems
• Shoulder strap and stylus holder included
• Made in France

Zebra Universal belt for fabric holster. for MC30XX, MC90XX, MC91990-G, TC8000 and WT40XX

Zebra Micro USB to USB cable for single slot cradle communication

Micro USB active-sync cable. Allows for active-sync connectivity between the mobile computer single or two slot cradle and a host device. Also used to connect the MS4717 fixed mount imager to a USB host for communication.

Zebra UK AC line cord

• Length: 1.8m
• Three wire
• Grounded BS1363 plug
• Applicable with: Zebra power supplies
• UK

Zebra three wire AC line cord - EU

• Length: 1.8m
• Includes: CEE 7/7 plug
• EU

Zebra EU AC Line Cord

Zebra AC Line Cord, 1.8 m ungrounded, two wire, BS 1363 Plug - UK

For PWRS-14000-249R and Team Desktop Charger DCH6001

Zebra shoulder strap

Universal shoulder strap for Zebra Handheld devices

Zebra rack/wall mounting bracket

Allows to install any single slot or multi slot cradle on a wall or a 19" IT rack. The bracket also allows to install up to four 4 slot spare battery chargers together on a wall or standard 19" IT rack.

Zebra battery, extended

Battery, 5200 mAh, high capacity

For: MC3300

Zebra battery, extended, pack of 10

Battery, 5200 mAh, high capacity

Pack of 10

For: MC3300

Zebra Spare battery, extended, 7,000 mAh, fits for Zebra MC33X0R, MC3300x

Spare battery, 7000 mAh, pack of 10, for: Zebra MC3300R, MC3300x Rugged Mobile Computer

Zebra Extended-capacity battery with PowerPrecision Plus

7000mAh extended-capacity battery with PowerPrecision Plus.

• Battery comes with improved ingress protection for MC3400/MC3450 use cases.
• Backwards compatible with MC3300ax & MC3300x models.
• Premium-grade battery cells with longer lifecycle. Designed to meet rigorous controls, standards and help prevent overcharging.
• Obtain advanced battery state of health information including charge level and battery age based on usage patterns.

Zebra DC line cord for PWR-BGA12V108W0WW

Zebra DC line cord

• Zebra power supply sold separately (PWR-BGA12V108W0WW)

Zebra DC Line Cord

• Order separately: Power supply (PWR-BGA12V50W0WW)

Zebra DC 'Y' Line Cord for running two SAC-TC8X-4SCHG-01 battery chargers with a single Level VI power supply PWR-BGA12V108W0WW 

Replacement for 25-85993-01R

Zebra charging device, USB

USB cable, provides fast-charge when a MC33 PP+ battery and a wall adapter is used, it also allows USB communication to the device when connected to a PC.

Requires: Power supply PWR-WUA5V12W0US

For: MC3300

Zebra USB C to USB A cable with 90º bend in USB-C adapter

Zebra USB C cable - TC21, TC26, TC51, TC52, TC56, TC57 - USB-A to USB-C charging and communications cable

• Requires USB cigarette lighter adapter (CHG-AUTO-USB1-01) for charging in-vehicle

Zebra USB Vehicle Cigarette Lighter Adapter -

Includes two USB A ports (5V, 2.5A) for charging

Zebra Single-slot charge / USB cradle

Single-slot USB cradle for charging one MC3300x / MC3300ax; MC3400 / MC3450
device and its spare battery.

• Allows USB communication to the device with an additional micro-USB cable.
• Supports fast-charging of the MC3400 / MC3450 device. Full charge of the
extended-capacity battery pack (7000mAh) in 4.5 hours and full charge of the
high-capacity (5200mAh) battery in about 3.5 hours.
• LED notification of spare battery charging status.

For: MC3300

Zebra Four-Slot charger cradle with spare battery charging

Four-slot charge-only cradle for MC3300x / MC3300ax; MC3400 / MC3450 devices
and their four spare batteries.

• Supports fast-charging of the MC3400 / MC3450 device. Full charge of the
extended-capacity battery pack (7000mAh) in 4.5 hours and full charge of the
high-capacity (5200mAh) battery in about 3.5 hours.
• Mounting options for standard 19-inch rack systems using mounting accessory
SKU# BRKT-SCRD-SMRK-01.
• Sold separately: Power Supply SKU# PWR-BGA12V108W0WW, DC cable SKU#
CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and
country-specific AC cable

Zebra Five-Slot Ethernet charger cradle with spare battery charging

Four-slot charge-only cradle for MC3300x / MC3300ax; MC3400 / MC3450 devices
and their four spare batteries with network speeds of up to 1 Gbps.

• Supports fast-charging of the MC3400 / MC3450 device. Full charge of the
extended-capacity battery pack (7000mAh) in 4.5 hours and full charge of the
high-capacity (5200mAh) battery in about 3.5 hours.
• Mounting options for standard 19-inch rack systems using mounting accessory
SKU# BRKT-SCRD-SMRK-01.
• Sold separately: Power Supply SKU# PWR-BGA12V108W0WW, DC cable SKU#
CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and
country-specific AC cable

Zebra Five-Slot charger cradle

Five-slot charge-only cradle, charges up to five MC3300x / MC3300ax; MC3400 /
MC3450 devices.

• Mounting options for standard 19-inch rack systems using mounting accessory
SKU# BRKT-SCRD-SMRK-01.
• Sold separately: Power Supply SKU# PWR-BGA12V108W0WW, DC cable SKU#
CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and
country-specific AC cable

Zebra Five-Slot Ethernet charger cradle

Five-slot charge / Ethernet cradle for up to five MC3300x / MC3300ax; MC3400 /
MC3450 devices with network speeds of up to 1 Gbps.

• Mounting options for standard 19-inch rack systems using mounting accessory
SKU# BRKT-SCRD-SMRK-01.
• Sold separately: Power Supply SKU# PWR-BGA12V108W0WW, DC cable SKU#
CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and
country-specific AC cable
 

Zebra HS3100 Rugged Wired Headset (Over-the-head headband)

includes HS3100 Shortened Boom Module and HSX100 OTH headband module

Zebra Power Supply Kit - 100-240V AC, 12V, 4.16A, 50W - includes Power Supply (PWR-BGA12V50W0WW) and DC Cable (CBL-DC-388A1-01)

Requires country specific three-wire grounded (C13) AC Line Cord sold separately

Zebra Single-slot charge / USB cradle kit

Single-slot USB cradle kit for charging one MC3300x / MC3300ax; MC3400 / MC3450
device and its spare battery.

• Allows USB communication to the device with an additional micro-USB cable.
• Supports fast-charging of the MC3400 / MC3450 device. Full charge of the
extended-capacity battery pack (7000mAh) in 4.5 hours and full charge of the
high-capacity (5200mAh) battery in about 3.5 hours.
• LED notification of spare battery charging status.
• Includes: Power Supply SKU# PWR-BGA12V50W0WW, DC cable SKU# CBL-DC-
388A1-01
• Sold separately: Micro-USB Cable SKU# 25-124330-01R, and country-specific
three-wire AC cable

Zebra Coiled Tether Set

Pack of three coiled tether for use with plastic or fibre tipped passive stylus

• Tether to hand strap on Expansion Back, Rugged Boot, or D-clip on Rugged Boot

Pack of 3

Zebra Screen protector, tempered glass, pack of 5  
 
Screen protector, tempered glass for: MC3400, MC3450

Pack of 5

Zebra Un-Powered Fork Lift Cradle Only - MC30, MC31, MC32, MC33

Bracket holds all configurations, except RFID terminals - Installs on a roll bar or square surface of the forklift and allows the device to be used in landscape or portrait mode - Includes RAM 1" diameter ball on back of cradle - Not compatible with devices with rubber boot attached

Requires RAM Mount Arm (MNT-RAM-B201U) and RAM Mount Base (MNT-RAM-B247U25)

Zebra RAM Double Socket Arm. Compatible with TC8000 cart mount.

Zebra RAM mount base

RAM forklift clamp 2.5-inch max width square rail base with 1 inch ball

• Used with un-powered forklift mount SKU# MNT-MC33-FLCH-01 and attaches to square shaped post of forklift.
• Uses RAM mount P/N SKU# RAM-B-201U

Zebra power supply for 5 slot cradle - AC input: 100-240V, 2.8A, DC output: 12V, 9A, 108W

• Order separately: DC line cord CBL-DC-381A1-01, AC mains power cord

Zebra power supply - 12 VDC, 4,16 A for single slot cradle

• Requires: DC line cord (specific DC cord dependent on product) also AC line cord

Zebra wall charger - EU power supply

• Power supply 100-240 VAC, 5V, 2.5A with EU plug
• Order separately: Device connection cable (USB, type A)

Zebra wall charger - UK power supply

• Power supply 100-240 VAC, 5V, 2.5A with UK plug
• Order separately: Device connection cable (USB, type A)

Zebra battery charging station, 20 slot

• Fast-charge while using MC33 PP+ batteries
• Compatible with MC32 and MC33 batteries
• Compatible with Level V and Level VI power supplies
• Desk/Wall/Rack mount options

Order separately: Power supply PWR-BGA12V108W0WW, DC cord CBL-DC-381A1-01 and country specific 3 wire AC line cord.

For: MC3300, MC3200

12 Month Warranty

Zebra battery charging station, 4 slot]

Spare battery charger to charge four spare batteries.

• Supports fast-charging for the its high-capacity battery (5200mAh) in about
3.5 hours, and the extended-capacity battery (7000mAh) in 4.5 hours.
• Compatible with MC3300x / MC3300ax ; MC3400 / MC34500 batteries: SKU#
BTRY-MC33-70MA-01, SKU# BTRY-MC33-7BLE-01, and SKU# BTRY-MC33-
27MA-01.
• Mounting options for standard 19-inch rack systems using mounting
accessory SKU# BRKT-SCRD-SMRK-01 for four chargers or could be used
standalone.
• Sold separately: Power Supply SKU# PWR-BGA12V50W0WW, DC cable
SKU# CBL-DC-388A1-01, and country-specific AC cable

Zebra MC3300 holster, gun

Fabric holster, secures to a belt or a shoulder strap.

Requires belt or shoulder strap ordered separately.

Zebra Hand Strap for Gun configurations - MC33

Spare hand strap for gun configurations, allows to attach and store a stylus with coiled tether

Order Stylus Separately: SG-TC7X-STYLUS-03

Zebra rubber boot 
 
Rubber boot for: MC3400, MC3450 (with gun)

Zebra MC32/MC33 SOFT HOLSTER

incl.: shoulder strap, belt clip

for: MC3300S, MC3300R (rotating head).

Zebra Stylus

SKU# SG-STYLUS-TCX-MTL-03

Fiber tipped stylus – pack of 3.

• Heavy-duty and made from stainless steel / brass. No plastic parts, real pen feel. Can be used in rain.
• Micro-knit, hybrid-mesh, fiber tip provides silent, smooth gliding use. 5" length.
• Big improvement over rubber tipped or plastic tipped stylus.
• Compatible with all capacitive touch screen devices.
• Tether to device or hand strap using SKU# SG-TC5NGTC7NG-TETHR-03.

Zebra TC73 / TC78, ET6x Stylus tether

• Can be attached to device tower bar.
• When hand strap is used, tether should attach to hand strap SKU# SG-NGTC5TC7-HDSTP-03 directly (not to terminal towel bar).
• String type tether prevents loss of stylus.

NOTE: Other Zebra coiled tethers are not recommended for use with TC73/TC78 as they may interfere with other accessories.

Zebra Stylus with Coiled tether - 3 pack

Made of conductive carbon filled plastic material, optimised for enterprise durability.

Zebra Capacitive stylus

Set of three capacitive styluses optimized for enterprise durability.

• Made of conductive carbon-filled plastic material with 5mm tip. 3.5” length.
• Can be stored in loop of hand strap.
• Sold separately: Hand strap SKU# SG-MC33-HDSTPG-01 and holster SKU#
SG-MC3X-SHLSTB-01

Zebra charging station adapter

MC3400 / MC3450 adapter charge-only cradle cup for MC32 legacy
cradles.

• Charges standard rate from 0-90% in about 5 hours.
• One cup is required per slot in a cradle

Zebra PowerPrecision+ Lithium-Ion battery pack 7000mAh, with Secondary BLE Beacon

Eligible for special pricing on the Device Tracker Solution (1 Year or 3 Year Term License), supports fast-charge while using MC33 cradles and chargers.

12 Month Warranty

Zebra PowerPrecision+ Lithium-Ion battery pack 7000mAh, with Secondary BLE Beacon

Eligible for special pricing on the Device Tracker Solution (1 Year or 3 Year Term License), supports fast-charge while using MC33 cradles and chargers.

Pack of 10

Zebra HS3100 rugged bluetooth headset (over-the-head headband)

includes HS3100 boom module (HS3100-BOOM-01) and HSX100 OTH headband module (KT-HS3X-OHEAD1-01)

Zebra Stylus Coil Tether

Zebra Replacement straight shooter strap

Zebra Rubber boot for straight shooter unit

Rubber boot for MC3400 / MC3450 for straight shooter terminal only.

• The rubber boot can be bent up to allow insertion of the terminal into the charge
cradle.