Accessories for Zebra ET65AW-ESQAGE00A0-A6

Manufacturer:

Zebra

MPN:

ET65AW-ESQAGE00A0-A6

Zebra ET65 Tablet, Standard Touch Screen, 1 physical SIM and 1 eSIM, 8/128 GB RAM/Flash, Android GMS, Extended Battery, ROW

• Warranty: 3 years

Zebra XDIM G2 Wiring Kit 5.5 X 2.5 plug - Bobcat, XSLATE B10, XSLATE D10, RangerX

Zebra Power Adapter 100-240V AC. 14V DC 5.5/2.5 for Industrial Dock

Power Cord not included

450042 (for EU)
450041 (for UK)

Zebra ET6x Vehicle Dock Charging

• 2 x USB Type A, 1 x RS232

Zebra VC80, VH10 - VESA Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Can also be attached to Quick Release Mount Plate (MT4205) - RAM D-size (2.25"") ball connected to a 4.75"" square plate with 4x100mm holes and 4x75mm holes in each corner - includes 4x bolts, nuts and lock washers

Zebra VC80, VH10 - Round Plate Base - Can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball - Uses smaller footprint than VESA Plate (MT3501)

Zebra VC80, VH10 - Clamp Base (2"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (2"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Clamp Base (3"" max arm/bar) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - Clamp the RAM arm on bars with square or rectangular cross section (3"" max. width) - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Rail Base (1-1/4"" to 1-7/8"" max. pipe diameter) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball

Zebra VC80, VH10 - Rail Base (2"" to 2-1/2"" max. pipe diameter) - Clamp can be used with the 4"" or 12"" RAM arm (MT4301 or MT4302) to mount a vehicle mount computer on any plane - RAM D-size (2.25"") ball

Zebra VC80, VH10 - 4"" RAM Mount - Short Arm - RAM D-size (2.25"") ball

Zebra VC80, VH10 - 12"" RAM Mount - Long Arm - RAM D-size (2.25"") ball

Zebra Stylus Coil Tether

Zebra ET80 / ET85, ET60-ET65 2-in-1 Rugged Tablet

ET8x,ET6x Carry Handle with Stylus Slot and Coiled Stylus Tether. Features Attach points for Optional Shoulder Strap. Rugged Snapback Frame Required (Sold Separately)

12 Month Warranty

Zebra ET80 / ET85, ET60/ET65 2-in-1 Rugged Tablet

ET8x, ET6x Detachable Shoulder Strap. Rugged Snapback Frame Required (Sold Separately)

12 Month Warranty

Zebra ET80 / ET85, ET60/ET65 2-in-1 Rugged Tablet ET8x MPP 2.0 Active Stylus.

• Allows for a large range of pressure sensitivity, tilt detection and hover capability
• IP55 water and dust protected
• Supports Microsoft Pen Protocol MPP 2.0
• Two side buttons for easy erase and menu access
• Can be tethered to tablet with SG-ET5X-SLTETR-01 (sold separately)
• Can be secured to tablet with Pen Loop Holder or inserted into ET8x,ET6x handle SG-ET8X-HANDLE1-01 (sold separately)
• Uses one AAAA battery, included

12 Month Warranty

Zebra Stylus

SKU# SG-STYLUS-TCX-MTL-03

Fiber tipped stylus – pack of 3.

• Heavy-duty and made from stainless steel / brass. No plastic parts, real pen feel. Can be used in rain.
• Micro-knit, hybrid-mesh, fiber tip provides silent, smooth gliding use. 5" length.
• Big improvement over rubber tipped or plastic tipped stylus.
• Compatible with all capacitive touch screen devices.
• Tether to device or hand strap using SKU# SG-TC5NGTC7NG-TETHR-03.

• SG-TC5NGTC7NG-TETHR-03 - Stylus Tether

Zebra TC73 / TC78, ET6x Stylus tether

• Can be attached to device tower bar.
• When hand strap is used, tether should attach to hand strap SKU# SG-NGTC5TC7-HDSTP-03 directly (not to terminal towel bar).
• String type tether prevents loss of stylus.

NOTE: Other Zebra coiled tethers are not recommended for use with TC73/TC78 as they may interfere with other accessories.

• SG-NGTC5TC7-HDSTP-03 - Hand strap - Pack of 3
• SG-TC5NGTC7NG-TETHR-03 - Stylus Tether

Zebra POWER, DC TO DC CONVERTER 9-60V IN 13.2V 4.54A OUT

Zebra Replacement Rotating Hand Strap for Expansion Back options

Adjustable and 360-degree rotatable handstrap that mounts on the back of the expansion back for ET4X SKU# ZBK-ET4X-8BTRYBK1-01 or SKU#ZBK-ET4X-10BTRYBK1-01

• Provides secure ergonomic option for holding the device