Accessories for Zebra DS3608-SR00003VZWW

Manufacturer:

Zebra

MPN:

DS3608-SR00003VZWW

GTIN:

5712505901090

Zebra DS3608 Ultra-Rugged Corded Handheld Barcode Scanner with Standard Range - SCANNER ONLY

Industrial Handheld 1D and 2D Scanner, Black and Green.

Imager: Standard Range

Multi-interface: RS232, KBW, USB

Protection Class: IP67

Zebra Belt Holster - DS36X8, LI36X8, DS35X8, LS34X8 and MT20X0

Zebra - Wall Mount Holder

Rugged Scanner Holder (can be mounted to Forklift)

Wrist Lanyard

Zebra Balancer Pulley with Retractable Cable - This retractable cable is attached to a pulley system to keep your bar code scanner out of the way, but within easy reach - DS3408, DS3508, DS3578, DS3608, DS3678, LI3608, LI3678, LS3408, LS3478, LS3578

Zebra UK AC line cord

• Length: 1.8m
• Three wire
• Grounded BS1363 plug
• Applicable with: Zebra power supplies
• UK

Zebra three wire AC line cord - EU

• Length: 1.8m
• Includes: CEE 7/7 plug
• EU

Zebra Cradle Mounting Bracket

Use With Stb36 & Flb36 , Vibration Dampening

Zebra Spare Battery for DS3678, LI3678 Series Barcode Scanners

Spare battery, 3150 mAh, PowerPrecision+

Zebra RS232 cable, 7 Ft. (2 m), TSD on 2.

Requires 12 V power supply

Zebra RS232 Straight Cable with DB9 Female Connector - 4.6m long

Requires 12V Power Supply.

Zebra 9ft (2.8m) RS232 Serial Cable - DB9 Female Connector - Coiled - Power Pin 9

Zebra 9ft (2.8m) RS232 Serial Cable - DB9 Male Connector - Coiled - Power Pin 9 - TxD on 2 - True Converter

Zebra 7ft (2m) RS232 Serial Cable - DB9 Female Connector - Straight - TxD on 2 - 12V - Low Temp -30C (Freezer Rated)

Requires External 12V Power Supply (PWR-BGA12V50W0WW) and DC Cable (CBL-DC-375A1-01) - DS3608, DS3678, LI3608, LI3678

• PWR-BGA12V50W0WW - Power supply
• CBL-DC-375A1-01 - DC Line Cord
• 50-16000-219R - AC Line Cord - UK
• 50-16000-220R - AC Line Cord - EU

Zebra 9ft (2.8m) RS232 Serial Cable - DB9 Female Connector - Coiled - TxD on 2 - 12V - Low Temp -30C (Freezer Rated) - Requires External 12V Power Supply (PWR-BGA12V50W0WW) and DC Cable (CBL-DC-375A1-01) - DS3608, DS3678, LI3608, LI3678

RS232 Coiled Connection cable - 2.8m

Power on PIN9

Zebra 9ft (2.8m) RS232 Serial Cable - DB9 Female Connector - Coiled - Power Pin 9 - TxD on 2 - True Converter - Low Temp -30C

Zebra Cable - RS232: DB9 Female Connector, 7ft. (2.1m)

Zebra Connection cable, USB, shielded.

Length: 15 ft (4.6 m)

Supports 12 V power supply

USB Connection cable, straight, shielded, length: 2m

USB Connection cable, straight, shielded, length: 4.6m

Zebra 7ft (2m) Shielded USB Cable - Series A Connector - Straight - USB Battery Charging (BC 1.2) - Low Temp -30C (Freezer Rated)

Zebra 12ft (3.7m) Shielded USB Cable - Series A Locking Connector for VC70 - Coiled - Low Temp -30C (Freezer Rated) - DS3608, DS3678, LI3608, LI3678

Zebra CABLE - SHIELDED USB: SERIES A, 9ft., COILED, BC1.2 (HIGH CURRENT), -30C 

Zebra 12ft (3.65m) Shielded USB Cable - Series A Connector - Coiled - High Current (USB Battery Charging - BC 1.2) - Low Temp -30C - DS3608, DS3678, LI3608, LI3678

Zebra 12ft (3.66m) Coiled Shielded USB Cable (Type A Connector) - High Current (USB Battery Charging BC 1.2) - Low Temp -30 (Freezer Rated) - Compatible with DS3608, LI3608, STB3678, FLB3678 (DS3678, LI3678)

Zebra Forklift DC Power Supply Adapter Cable - STB3678, FLB3678 - For use with PWRS-14000-251R or PWRS-14000-252R DC to DC Power Supplies

• PWRS-14000-251R - DC/DC Power Converter, 18-75VDC to 12VDC
• PWRS-14000-252R - Power Supply DC/DC Low Voltage Power Converte

Zebra DC Line Cord for connecting a Level VI Power Supply PWR-BGA12V50W0WW to all Advanced Data Capture (ADC) products except DS3608, DS3678, LI3608 and LI3678 scanners which use CBL-DC-451A1-01. Level VI replacement for PWRS-14000-148R

Zebra DC Line Cord

• Order separately: Power supply (PWR-BGA12V50W0WW)

Zebra DC line cord with filter, fits for: DS3600, LI3600

Zebra 3600 SERIES ETHERNET ADAPTER, STD TCP/IP, 24 VDC, RJ45, COMPATIBLE WITH 3600 SERIES

Power source required. Customer to supply 24 VDC source or order Zebra power supply PWR-BGA12V50W0WW & line cords CBL-DC-388A1-01 & 23844-00-00R

Eliminating third-party converter boxes and related equipment from the system removes a point of vulnerability on the network. When scanners are connected directly to the PLC it creates a more secure data capture environment.

3600 Series scanners can now connect directly to the PLC system which eliminates unnecessary networking equipment from the setup and reduces the risk of unplanned downtime due to process failure

Network Connect accommodates popular Industrial Ethernet Protocols so programmers don’t have to spend time making complex protocol conversion systems work. Seamlessly integrate Network Connect with a proprietary PLC and instantly remove the errors that can occur with an extra layer of third-party equipment on an industrial network.

Easy connection to PLC networks for all 3600 Series scanners

Purpose-built for the plant floor

12 Month Warranty

Zebra Sealed Cradle For 3678 Series 

Charger, Bluetooth and Multi Interface, IP65 Sealed 

Provides radio and charging capabilities, up to 7 scanners can be paired per cradle

Requires: connection cable, power supply, which are available in accessories

• BRKT-MM0036W-00 - Cradle Mounting Bracket
• PWRS-14000-251R - DC/DC Power Converter, 18-75VDC to 12VDC
• PWRS-14000-252R - Power Supply DC/DC Low Voltage Power Converte
• CBL-36-452A-01 - Forklift DC Power Supply Adapter Cable

Zebra power supply - 12 VDC, 4,16 A for single slot cradle

• Requires: DC line cord (specific DC cord dependent on product) also AC line cord

• CBL-DC-388A1-01 - DC Line Cord
• CBL-DC-382A1-01 - DC line cord
• CBL-DC-451A1-01 - DC line cord with filter
• CBL-DC-379A1-01 - DC Y Line Cord
• CBL-DC-375A1-01 - DC Line Cord
• 50-16000-219R - AC Line Cord - UK
• 50-16000-220R - AC Line Cord - EU

Zebra DC/DC Power Converter, 18-75VDC to 12VDC for VC6090, MC90XX, MC9190-G and MC9200 Forklift Cradle. incl. fused power cable. Use on electric forklifts with 24V, 36V and 48V batteries.It cannot be used with the VC6096

Zebra power supply , for use on electric forklifts with 12V batteries, 9-30VDC to 12VDC

Zebra battery charging station with 4 slots

Requires: power supply and power cord, available in accesories.

Suitable for: DS3678, LI3678

• PWR-BGA12V50W0WW - Power supply
• CBL-DC-375A1-01 - DC Line Cord
• 50-16000-219R - AC Line Cord - UK
• 50-16000-220R - AC Line Cord - EU

Zebra Standard Cradle For 3678 Series

Charger, Bluetooth and Multi Interface

Provides radio and charging capabilities, up to 7 scanners can be paired per cradle

Power Supply and Interface Cable to be ordered separately

• BRKT-MM0036W-00 - Cradle Mounting Bracket
• PWR-BGA12V50W0WW - Power supply
• CBL-DC-451A1-01 - DC line cord with filter
• 50-16000-219R - AC Line Cord - UK
• 50-16000-220R - AC Line Cord - EU

Zebra Intellistand for barcode scanner - adjustable, black

Suitable for: DS3678, DS3608, LI3678, LI3608 scanner

Zebra Cable - RS232: DB9 Female Connector, 20ft. (6.0m) Coiled, TxD on 2, with TTL Current Limit Protection

Zebra 20ft (6.10m) Coiled RS232 Serial Cable (DB9 Female, TxD on 2, 12V) - CR8178-S (DS8178), CR8178-P (DS8178), DS3608, LI3608, STB3678, FLB3678 (DS3678, LI3678) - Requires External 12V Power Supply (PWR-BGA12V50W0WW), DC Cable (CBL-DC-375A1-01) and country specific three-wire grounded (C13) AC Line Cord, all sold separately

Zebra 7ft (2.13m) Straight Shielded USB Cable (Type A Connector, 12V) - Low Temp -30 (Freezer Rated)

Requires Power Supply (PWR-BGA12V50W0WW), DC Cable (CBL-DC-451A1-01) and country specific three-wire grounded (C13) AC Line Cord, all sold separately - Compatible with DS3608, LI3608, STB3678, FLB3678 (DS3678, LI3678)

Zebra 9ft (2.8m) Shielded USB Amphenol threaded circular connector Cable - Coiled - Low Temp -30C (Freezer Rated) - DS36xx to VC5090 or FLC9000 - Not capable of powering DS3608-ER, CBA-UF5-C09ZAR should be used instead - Cannot be used with full screen VC5090 computers that use an external keyboard, as the keyboard uses the rugged USB connector - Will charge a fully depleted battery in approximately 10.5hrs when connected to the 36xx cradle (STB3678 or FLB3678)

Zebra 12ft (3.66m) Coiled Shielded USB Cable (Type A Locking Connector for VC70) - Low Temp -30C (Freezer Rated) - USB cable locks onto VC70 using two screws - When connected to STB3678 or FLB3678, will charge a fully depleted battery in about 10 hours (provides 500 maH current to cradle) - Compatible with DS3608, LI3608, STB3678, FLB3678 (DS3678, LI3678)

Power Supply :100-240 VAC,12VDC,4.16A

Power supply used with MC50, MC1000, four slot cradles and MC55, MC55A0, MC55A0-HC, MC70, MC75, MC3000, MC3100, MC90XX, MC9190-G, WT4000 and MC75A single slot cradles.