Accessories for Zebra DS3600-XR Extended Range Ultra-Rugged Scanner

Zebra Belt Holster - DS36X8, LI36X8, DS35X8, LS34X8 and MT20X0

Zebra - Wall Mount Holder

Rugged Scanner Holder (can be mounted to Forklift)

Wrist Lanyard

Zebra Balancer Pulley with Retractable Cable - This retractable cable is attached to a pulley system to keep your bar code scanner out of the way, but within easy reach - DS3408, DS3508, DS3578, DS3608, DS3678, LI3608, LI3678, LS3408, LS3478, LS3578

Zebra UK AC line cord

• Length: 1.8m
• Three wire
• Grounded BS1363 plug
• Applicable with: Zebra power supplies
• UK

Zebra three wire AC line cord - EU

• Length: 1.8m
• Includes: CEE 7/7 plug
• EU

Zebra Cradle Mounting Bracket

Use With Stb36 & Flb36 , Vibration Dampening

Zebra Spare Battery for DS3678, LI3678 Series Barcode Scanners

Spare battery, 3150 mAh, PowerPrecision+

Zebra RS232 cable, 7 Ft. (2 m), TSD on 2.

Requires 12 V power supply

Zebra RS232 Straight Cable with DB9 Female Connector - 4.6m long

Requires 12V Power Supply.

Zebra 9ft (2.8m) RS232 Serial Cable - DB9 Female Connector - Coiled - Power Pin 9

Zebra 7ft (2m) RS232 Serial Cable - DB9 Female Connector - Straight - TxD on 2 - 12V - Low Temp -30C (Freezer Rated)

Requires External 12V Power Supply (PWR-BGA12V50W0WW) and DC Cable (CBL-DC-375A1-01) - DS3608, DS3678, LI3608, LI3678

• PWR-BGA12V50W0WW - Power supply
• CBL-DC-375A1-01 - DC Line Cord
• 50-16000-219R - AC Line Cord - UK
• 50-16000-220R - AC Line Cord - EU

Zebra 9ft (2.8m) RS232 Serial Cable - DB9 Female Connector - Coiled - TxD on 2 - 12V - Low Temp -30C (Freezer Rated) - Requires External 12V Power Supply (PWR-BGA12V50W0WW) and DC Cable (CBL-DC-375A1-01) - DS3608, DS3678, LI3608, LI3678

RS232 Coiled Connection cable - 2.8m

Power on PIN9

Zebra connection cable, USB, straight, shielded, 2.8 m

Zebra Connection cable, USB, shielded.

Length: 15 ft (4.6 m)

Supports 12 V power supply

Zebra 15ft (4.6m) Shielded Power Plus USB Cable - Straight - 12V

USB Connection cable, straight, shielded, length: 2m

USB Connection cable, straight, shielded, length: 4.6m

Zebra 7ft (2m) Shielded USB Cable - Series A Connector - Straight - USB Battery Charging (BC 1.2) - Low Temp -30C (Freezer Rated)

Zebra CABLE - SHIELDED USB: SERIES A, 9ft., COILED, BC1.2 (HIGH CURRENT), -30C 

Zebra 12ft (3.65m) Shielded USB Cable - Series A Connector - Coiled - High Current (USB Battery Charging - BC 1.2) - Low Temp -30C - DS3608, DS3678, LI3608, LI3678

Zebra 12ft (3.66m) Coiled Shielded USB Cable (Type A Connector) - High Current (USB Battery Charging BC 1.2) - Low Temp -30 (Freezer Rated) - Compatible with DS3608, LI3608, STB3678, FLB3678 (DS3678, LI3678)

Zebra Forklift DC Power Supply Adapter Cable - STB3678, FLB3678 - For use with PWRS-14000-251R or PWRS-14000-252R DC to DC Power Supplies

• PWRS-14000-251R - DC/DC Power Converter, 18-75VDC to 12VDC
• PWRS-14000-252R - Power Supply DC/DC Low Voltage Power Converte

Zebra DC Line Cord for connecting a Level VI Power Supply PWR-BGA12V50W0WW to all Advanced Data Capture (ADC) products except DS3608, DS3678, LI3608 and LI3678 scanners which use CBL-DC-451A1-01. Level VI replacement for PWRS-14000-148R

Zebra DC line cord with filter, fits for: DS3600, LI3600

Zebra 3600 SERIES ETHERNET ADAPTER, STD TCP/IP, 24 VDC, RJ45, COMPATIBLE WITH 3600 SERIES

Power source required. Customer to supply 24 VDC source or order Zebra power supply PWR-BGA12V50W0WW & line cords CBL-DC-388A1-01 & 23844-00-00R

Eliminating third-party converter boxes and related equipment from the system removes a point of vulnerability on the network. When scanners are connected directly to the PLC it creates a more secure data capture environment.

3600 Series scanners can now connect directly to the PLC system which eliminates unnecessary networking equipment from the setup and reduces the risk of unplanned downtime due to process failure

Network Connect accommodates popular Industrial Ethernet Protocols so programmers don’t have to spend time making complex protocol conversion systems work. Seamlessly integrate Network Connect with a proprietary PLC and instantly remove the errors that can occur with an extra layer of third-party equipment on an industrial network.

Easy connection to PLC networks for all 3600 Series scanners

Purpose-built for the plant floor

12 Month Warranty

Zebra Sealed Cradle For 3678 Series 

Charger, Bluetooth and Multi Interface, IP65 Sealed 

Provides radio and charging capabilities, up to 7 scanners can be paired per cradle

Requires: connection cable, power supply, which are available in accessories

• BRKT-MM0036W-00 - Cradle Mounting Bracket
• PWRS-14000-251R - DC/DC Power Converter, 18-75VDC to 12VDC
• PWRS-14000-252R - Power Supply DC/DC Low Voltage Power Converte
• CBL-36-452A-01 - Forklift DC Power Supply Adapter Cable

Zebra Power Supply Kit - 100-240V AC, 12V, 4.16A, 50W - includes Power Supply (PWR-BGA12V50W0WW) and DC Cable (CBL-DC-388A1-01)

Requires country specific three-wire grounded (C13) AC Line Cord sold separately

• 50-16000-219R - AC Line Cord - UK
• 50-16000-220R - AC Line Cord - EU

Zebra power supply - 12 VDC, 4,16 A for single slot cradle

• Requires: DC line cord (specific DC cord dependent on product) also AC line cord

• CBL-DC-388A1-01 - DC Line Cord
• CBL-DC-382A1-01 - DC line cord
• CBL-DC-451A1-01 - DC line cord with filter
• CBL-DC-379A1-01 - DC Y Line Cord
• CBL-DC-375A1-01 - DC Line Cord
• 50-16000-219R - AC Line Cord - UK
• 50-16000-220R - AC Line Cord - EU

Zebra DC/DC Power Converter, 18-75VDC to 12VDC for VC6090, MC90XX, MC9190-G and MC9200 Forklift Cradle. incl. fused power cable. Use on electric forklifts with 24V, 36V and 48V batteries.It cannot be used with the VC6096

Zebra power supply , for use on electric forklifts with 12V batteries, 9-30VDC to 12VDC

RAM Power-Grip Universal Scanner Gun Holder

Whether it is a vehicle mounted terminal, tablet or monitor mount, RAM has a full range of solutions to meet the demands of the toughest users. RAM has once again innovated with the Power-Grip™ Universal Scanner Gun Holder. This product is compatible with a wide range of ruggedized 2D barcode scanners and is compatible with RAM's full range of forklift mounting systems, as well as mounting systems for a variety of mounting scenarios. Using a variety of high strength, quality materials, The Power-Grip™ securely locates your 2D barcode scanner while you aren't using it. When required, the 2D barcode scanner easily removes to quickly scan the desired item. The unique open bottom design enables scanning while in the holder. Replaceable elastomeric fins grip the handle of the scanner tight to ensure the most secure fit, and can be easily replaced if required. Backed with RAM's renowned lifetime warranty, the Power-Grip™ Universal Scanner Gun Holder is an essential accessory for your 2D barcode scanner.

Features

• Universal scanner gun holder features replaceable elastomeric fins for a secure fit
• Includes both side and bottom mounting attachment points; compatible with GDS® shoulder strap accessory and third-party lanyards
• Made of high-strength composites with stainless steel thread post for durability and reliability in the most demanding environments
• Backed by a lifetime warranty

Zebra battery charging station with 4 slots

Requires: power supply and power cord, available in accesories.

Suitable for: DS3678, LI3678

• PWR-BGA12V50W0WW - Power supply
• CBL-DC-375A1-01 - DC Line Cord
• 50-16000-219R - AC Line Cord - UK
• 50-16000-220R - AC Line Cord - EU

Zebra Standard Cradle For 3678 Series

Charger, Bluetooth and Multi Interface

Provides radio and charging capabilities, up to 7 scanners can be paired per cradle

Power Supply and Interface Cable to be ordered separately

• BRKT-MM0036W-00 - Cradle Mounting Bracket
• PWR-BGA12V50W0WW - Power supply
• CBL-DC-451A1-01 - DC line cord with filter
• 50-16000-219R - AC Line Cord - UK
• 50-16000-220R - AC Line Cord - EU

Zebra Intellistand for barcode scanner - adjustable, black

Suitable for: DS3678, DS3608, LI3678, LI3608 scanner