Zebra 20ft (6.10m) Coiled RS232 Serial Cable (DB9 Female, TxD on 2, 12V) - CR8178-S (DS8178), CR8178-P (DS8178), DS3608, LI3608, STB3678, FLB3678 (DS3678, LI3678) - Requires External 12V Power Supply (PWR-BGA12V50W0WW), DC Cable (CBL-DC-375A1-01) and country specific three-wire grounded (C13) AC Line Cord, all sold separately
- Manufacturer:
- Zebra
- MPN:
- CBA-RF0-S07PAR
Zebra 7ft (2m) RS232 Serial Cable - DB9 Female Connector - Straight - TxD on 2 - 12V - Low Temp -30C (Freezer Rated)
Requires External 12V Power Supply (PWR-BGA12V50W0WW) and DC Cable (CBL-DC-375A1-01) - DS3608, DS3678, LI3608, LI3678
Additional items required for CBA-RF0-S07PAR
- Manufacturer:
- Zebra
- MPN:
- CBA-U45-S15ZAR
Zebra 15ft (4.6m) Shielded Power Plus USB Cable - Straight - 12V
- Manufacturer:
- Zebra
- MPN:
- CBA-UF0-S07PAR
- GTIN:
- 5704174968412
Zebra 7ft (2.13m) Straight Shielded USB Cable (Type A Connector, 12V) - Low Temp -30 (Freezer Rated)
Requires Power Supply (PWR-BGA12V50W0WW), DC Cable (CBL-DC-451A1-01) and country specific three-wire grounded (C13) AC Line Cord, all sold separately - Compatible with DS3608, LI3608, STB3678, FLB3678 (DS3678, LI3678)
- Manufacturer:
- Zebra
- MPN:
- CBA-UF3-C09ZAR
Zebra 9ft (2.8m) Shielded USB Amphenol threaded circular connector Cable - Coiled - Low Temp -30C (Freezer Rated) - DS36xx to VC5090 or FLC9000 - Not capable of powering DS3608-ER, CBA-UF5-C09ZAR should be used instead - Cannot be used with full screen VC5090 computers that use an external keyboard, as the keyboard uses the rugged USB connector - Will charge a fully depleted battery in approximately 10.5hrs when connected to the 36xx cradle (STB3678 or FLB3678)
- Manufacturer:
- Zebra
- MPN:
- CBA-UF4-C09ZAR
Zebra CABLE - USB, RS232 "Y" POWER STEALER, 9FT COILED, -30C
- Manufacturer:
- Zebra
- MPN:
- CBA-UF5-C09ZAR
Zebra 9ft (2.8m) VC5000 or FLC9000 to DS3608-ER 'Y' Coiled Cable (USB) - Low Temp -30┬░C (Freezer Rated) - Provides USB communication between VC5090 or FLC9000 and scanner - Y Cable is designed to connect to either VC5090 COM1 or COM2 and USB A port or FLC9000 COM1 and USB port - When connecting to the FLC9000, USB host adapter (25-71915-01R) is required and the MC92 may need to be set to USB Host Mode - COM1 or COM2 port provides additional power needed for DS3608-ER, however an application (i.e. SerialWedge or DataWedge) must be used, to open the COM port before power will be applied to it