Accessories for Honeywell CT60 XP 4.7inch Handheld Computer for Indoors and Outside

Mobilis Wrist mount - arm Band universal for smartphone and handheld device - 5 to 7”

With our wrist mount, never drop or break your smartphone or handheld device again by attaching it to your wrist or your arm. The devices are securely attached to the arm pouch thanks to silicon mounts. Thanks to its two Velcro straps it fits all body sizes and it can be easily adjusted to fit to your forearm. Therefore it can be attached and removed very quickly. You can use your smartphone or hhd device upright or sideways thaks to a rotating system that suits your needs.

• You can attach all 5 to 7” smartphones and data acquisition terminals to your wrist/arm
• Universal silicone mounting device
• Velcro-adjustable arm band to fit all wrist sizes
• A 360° rotating holder to use your device vertically or horizontally
• 2-year warranty

Each

• 001041 - Sleeve for Wearable Wristmount - Washable - Large
• 001040 - Sleeve for Wearable Wristmount - Washable - Medium

Mobilis Holster for mobile computers & smartphones - Belt - Hands-free system - Size M 

This datacapture holster is designed to effortlessly store and carry your data acquisition terminal or smartphone. Your device is secured and held in place with an elastic flap closure. Its removable belt allows you to attach the holster to your waist and always keep it close at hand. With its stylus strap, you can have easy access to your pen or stylus whenever you need. Additionally, its front pocket means you can take an additional batttery, your smartphone or any other accessories. For maximum compatibility with your data acquisition terminals.

• Belt included
• Shoulder strap ring : compatible MOBILIS® shoulder strap : 001027 / 001025 / 001048
• 1 stylus/pen holder
• 1 front pocket for additional battery or other accessories
• An elastic closing flap strap stops the device from falling out while providing easy access to it
• Maximum device size : 9 x 19 x 4 cm
• Hard-wearing material (1680D polyester)
• 2-year warranty

• 001027 - Secure Transport Shoulder Strap
• 001025 - Shoulder strap ergonomic with neck - shoulder pad
• 001048 - Basic shoulder strap with 4 soft rings

Mobilis Basic Holster for mobile scanner & smartphone - Belt - Easy access system - Size M

Easier to carry and store your device, the design of this HHD makes everyday life effortless. This universal protective holster is equipped with a removable belt, which means you always have your HHD or smartphone within easy reach. Also, you’ll never waste time looking for your HHD or smartphone as you’ll always have it with you. To ensure complete protection and to be compatible with all HDD or smartphones, this holster comes in 2 different sizes.

• Includes a belt strap (belt included)
• 1 stylus/pen holder
• Forklift mount compatible (plastic cable ties not included)
• Maximum device size : 18 x 9 x 3 cm
• Hard-wearing material (1680D polyester)
• 2-year warranty

Mobilis Holster for Handheld device with pistol grip - Belt & leg strap - Size S

Designed to make storing and carrying your pistol grip device as easy as possible, this holster always keeps it within easy reach. Equipped with a removable belt, you can attach the holster wherever you want making it easy to access at all times. This holster has been designed to adapt to all work situations and to make your life easier. Thanks to its layout, this auto id holster is perfect for professional use.

• Holster for handheld devices with pistol grip
• Belt included : 2.5 cm wide
• Includes a leg strap Belt and leg
• belt included
• Integrated shoulder strap rings
• Forklift mount fixation (plastic cable ties not included)
• Hard-wearing material (1680D polyester)
• Size S : maximum handheld device dimensions : 18x9.5x5.5cm
• 2-year warranty

Each

Mobilis Screen protector unbreakable anti-shock IK06 Clear finishing for Honeywell CT60XP - CT60 - CT50

• Anti-Shock: IK06 standard (best anti-shock protection on the market)
• Anti-Scratch (5H hardness)
• Flexible unbreakable screen protector
• Clear finish: increased visual clarity
• Anti-microbial: eliminates 99% of microbes in less than 24 hours
• Oleophobic: repels water / grease and dirt
• Quick and easy to install - bubble-free
• Installation kit provided (cleaning wipes/microfibre cloth/dust protection/smoothing card)
• Perfect touch sensitivity (0.33 mm thickness)
• Compatible with the MOBILIS® capacitive stylus
• 2-year warranty

Mobilis Rugged protective case for Honeywell CT60XP - CT60 - CT50 + handstrap - PROTECH

The dedicated PROTECH protective case has been cleverly designed by MOBILIS® for your Honeywell CT60XP - CT60 - CT50. This fully protects your IT device should you drop it. The protective case can withstand up to 400 drops from a height of 1.2m and is equipped with three systems that can cushion shocks, absorb shock waves and withstand impacts. Versatile and light, the PROTECH protective case fits perfectly to your device like a second skin so you will hardly notice it’s there. Lastly, the accessories (elastic strap and stylus holder) provide a perfect combination to use your device in complete safety.

• Flexible and light case specially designed for Honeywell CT60XP - CT60 - CT50
• Drop-resistant: 40x greater than military standard MIL-STD 810G
• Air Cell System: Air cell on each of the 4 corners; capable of withstanding 1 000 drops from a height of 1.2m
• Compatible Honeywell charging accessories
• Detachable elastic strap included
• Stylus holder on the elastic strap
• Access to all ports and functionalities
• Made in France
• Case 30% recycled - 100% recyclable
• 2-year warranty

Mobilis Rugged protective case for Honeywell CT60XP - CT60 - CT50 - PROTECH 

 This case includes 3 systems that can cushion shocks, absorb shock waves and withstand impacts. Flexible and light, it perfectly fits your Honeywell Dolphin CT60/50 datacapture mobile device. Thank to this equippment you will save time and money on maintenance costs and help your end-users on the field.

• Flexible and light case specially designed for Honeywell CT60XP - CT60 - CT50
• Drop-resistant: 40x greater than military standard MIL-STD 810G
• Air Cell System: Air cell on each of the 4 corners; capable of withstanding 1 000 drops from a height of 1.2m
• Compatible Dolphin charging accessories: Dolphin docking station (NetBase/ ChargeBase/ HomeBase/ eHomeBase)
• Access to all ports and functionalities
• Made in France
• 30% recycled - 100% recyclable
• 2-year warranty

Power Plug Adapter Kit - Kit includes AC power adapter kit (US, EU, UK, China) & USB cable.

Honeywell CT40, CT50 and CT60 Replacement Stylus

Pack of 5.

Honeywell CT50 and CT60 Hand Strap

Pack of 3.

Honeywell Power Cable, Dock-to-Fuse Block

A 182.9 cm (72 in) power cable with spade lugs and 3-pin connector for connection of Mobile Base to fuse block or similar connection point. Supports input voltage of 12–30V DC.

(Note: If direct connection to fuse block not available, requires use of 203-803-001 Fuse Block Power Kit. This kit is optional)

• 203-803-001 - Vehicle Dock Fuse Block Power Kit RoHS

Honeywell spare battery

Standard Spare battery, 4020 mAh,

for: CT50, CT60

Honeywell spare battery

Spare battery, 4020 mAh, fits for: CT60-Atex

Honeywell Battery Pack (textured cover)

Spare battery, 4020 mAh

fits for: CT60 XP

Honeywell Battery Pack (NI/ATEX/IECEX)

Spare battery, 4020 mAh

fits for: CT60 XP (ATEX)

Honeywell Battery Pack (DR and textured cover)

Replacement battery for mobile computer.

Battery, STD, 4020mAh, Disinfectant-Ready

The USB-A to USB-B cable connects the printer device port (type B) to a PC host port (type A) to provide USB connectivity. Cable length is 2 m (6.5 ft).

Note: This USB cable ships standard with each Honeywell printer.

Honeywell SCREEN PROTECTOR, CT50

Honeywell Power Adapter, 12V 3A - Replacement 36W power supply for use with the
Ethernet home base and the charge-only home base.

Requires country-specific IEC C13 AC Power Cord ordered separately

• 77900507E - C13 Type Power Cord - UK
• 77900508E - C13 Type Power Cord - EU

Honeywell Replacement 84 W 12V 7A power supply for use with quad battery charger.

Requires country-specific IEC C13 AC Power Cord) ordered separately

• 77900507E - C13 Type Power Cord - UK
• 77900508E - C13 Type Power Cord - EU

Honeywell Power supply, USB, 5 V, 2 A

incl.: Adapter plugs (US, EU, UK, ANZ, IND)

Honeywell C13 Power cord, UK, IEC320-C13, 2.5 m (8.2 ft)

Honeywell C13 Power cord, Europe, IEC320-C13, 2.5 m (8.2 ft)

Honeywell Mounting Kit, for Honeywell Vehicle Holders

Honeywell Vehicle Dock Mounting Kit - Required for Vehicle Dock or Vehicle Holder

includes one 4.75"" adjustable pivot arm with two 1.5"" stainless steel balls and assembly hardware 

Requires hardware supplied by the customer to secure the mount to the vehicle

Honeywell Pouch suitable for use with Dolphin CT50, CT60, and
C T4 0.

Honeywell Holster suitable for use with Dolphin CT50, CT60, and CT40.

Honeywell CT50 / CT60 HOLSTER SCAN HANDLE

Unitech Heavy duty suction mount.

Alternative for RAM-B-166-202U

Honeywell For recharging upto 4 computers. Kit includes Dock and Power Supply

must order Power Cord separately.

• 77900507E - C13 Type Power Cord - UK
• 77900508E - C13 Type Power Cord - EU

Honeywell Four-bay terminal charging cradle for recharging up to 4 computers. Kit includes
dock, power supply, and power cord.

Includes dock and power supply and EU power cord.

• 77900507E - C13 Type Power Cord - UK

Honeywell Charging cradle for recharging computer, battery, and Ethernet communications.

Kit includes dock and power supply.

Supports USB client via USB Type B connector. USB Type B to Type A cable (321-576-004) sold separately.

Must order power cord separately.

• 77900507E - C13 Type Power Cord - UK
• 77900508E - C13 Type Power Cord - EU
• 321-576-004 - USB-A to USB-B Cable

Honeywell Charging cradle for recharging computer, battery and Ethernet communications.

Kit includes dock, power supply and EU power cord.

Supports USB client via USB Type B connector. USB Type B to Type A cable (321-576-004) sold separately in accessories.

• 321-576-004 - USB-A to USB-B Cable

Honeywell Charging cradle for recharging computer and battery.

Kit includes dock, power supply, and power cord.

Supports USB client via USB Type B connector.

USB Type B to Type A cable (321-576-004) sold separately.

Includes dock and power supply.

Must order power cord separately

• 77900507E - C13 Type Power Cord - UK
• 77900508E - C13 Type Power Cord - EU
• 321-576-004 - USB-A to USB-B Cable

Honeywell charging - communication station, USB

Honeywell charging / communication station, 1x device, 1x spare battery, USB

incl.: power supply, power cord (EU)

fits for: CT50, CT60

• 77900507E - C13 Type Power Cord - UK
• 321-576-004 - USB-A to USB-B Cable

Honeywell CT60 XP Mobile Base

Vehicle dock with hard-wired 3-pin power cable and a standard USB Type A cable.

The vehicle dock has an enhanced speaker audible in noisy environments. Mounting (805-611-001) and
vehicle power connection (226-109-003 or -004) kits sold separately.

This vehicle dock works with the new releases of the CT60XP and is backward compatible with the original CT60 SKUs

• 805-611-001 - Vehicle Holder Mounting Kit
• 226-109-003 - Power Cable, Dock to Fuse Block RoHS

Honeywell vehicle charging-/communication station, USB

Vehicle dock with hard-wired 3-pin power cable and a standard USB Type A cable. It includes cigarette lighter power adapter. The vehicle dock has an enhanced speaker audible in noisy environments.

Mounting kit (805-611-001) sold separately.

This vehicle dock works with the new releases of the CT60XP and is backward compatible with the
original CT60 SKUs.

 fits for: CT60XP, CT60

• 805-611-001 - Vehicle Holder Mounting Kit

Honeywell Mobile Adapter - Snap on cup with 10-30V cigarette lighter plug.

Honeywell Mobile Base Cigarette Adapter Power Cable

Cable with 3-pin plug and cigarette lighter adapter for use with Mobile Base.

Honeywell Four-bay terminal charging cradle for Ethernet communications and recharging up to 4
computers. Kit includes dock, power supply,

Must order Power Cord separately.

• 77900507E - C13 Type Power Cord - UK
• 77900508E - C13 Type Power Cord - EU

Honeywell Four-bay terminal charging cradle for Ethernet communications and recharging up to 4
computers. Kit includes dock, power supply, and power cord.

Includes EU power cord.

• 77900507E - C13 Type Power Cord - UK

Honeywell battery charging station, 4 slots

Battery charging station, 4 slots

incl.: power supply

order separately: power cord, fits for: CT50, CT60

• 77900507E - C13 Type Power Cord - UK
• 77900508E - C13 Type Power Cord - EU

Four-slot battery charging station for recharging up to 4 batteries. Kit includes dock, power supply and power cord.
Please note - batteries shown in photo are not included.

• 77900507E - C13 Type Power Cord - UK

Honeywell Snap-on cup with Standard Type A connector. Supports USB client.

Please Note: For AC charging, the power plug adapter kit (213-029-001) is required.

• 213-029-001 - Power Plug Adapter Kit

Honeywell scan handle

Scan handle, fits for: for CT60 XP DR, it is not compatible with previous releases of the CT60, it allows the device to be docked and charged while mounted

Honeywell Device Client Pack

The Device Client Pack (DCP) includes Launcher, Enterprise Browser, BasicTE, and Mobility Web SDK, these applications are pre-loaded on the device.

All CW45 units include a 1 Year DCP Termed Pre-License for initial evaluation of the DCP applications (it does NOT include a Perpetual Pre-License), after the 1 Year Term period expires, a Perpetual or Term license is required to be purchased.

There are two licensing options that can be purchased for DCP:

1. Perpetual License Purchase DCP-001 - Perpetual Licenses operate without expiration for the authorized software version features, and includes 1 year of Maintenance. Add additional Software Maintenance separately.

2. Term + Maintenance License Purchase DCP-SFT1, DCP-SFT2, DCP-SFT3, DCP-SFT4 or DCP-SFT5 - Term + Maintenance Licenses provide software operation, software new version features, and tech support, all for a defined period.

Device Client Pack Perpetual License (DCP) includes 1 Year Software Maintenance.

License covers Launcher, Enterprise Browser, BasicTE, and Mobility Web SDK.

Launcher - gives the customer total control over which apps can be run on the device.

BasicTE Android device Terminal Emulation is a simplified alternative for those not yet ready to upgrade to SmartTE.

Enterprise Browser provides corporations the ability to run standard web applications from a controlled environment.

Purchase additional years of Software Maintenance DCP-SFT1, DCP-SFT2, DCP-SFT3, DCP-SFT4 or DCP-SFT5 prior to maintenance expiring.

Perpetual license provides continuous access to the software, but includes only one year of maintenance for updates and patches

Honeywell Device Client Pack - 1 Year Term + Maintenance

(License covers Launcher, Enterprise Browser, BasicTE, and Mobility Web SDK)

Maintenance Licenses provide software operation, software new version features, and tech support, all for a defined period.

Honeywell Device Client Pack - 2 Year Term + Maintenance

(License covers Launcher, Enterprise Browser, BasicTE, and Mobility Web SDK)

Maintenance Licenses provide software operation, software new version features, and tech support, all for a defined period.

Honeywell Device Client Pack - 3 Year Term + Maintenance

(License covers Launcher, Enterprise Browser, BasicTE, and Mobility Web SDK)

Maintenance Licenses provide software operation, software new version features, and tech support, all for a defined period.

Honeywell Device Client Pack - 4 Year Term + Maintenance

(License covers Launcher, Enterprise Browser, BasicTE, and Mobility Web SDK)

Maintenance Licenses provide software operation, software new version features, and tech support, all for a defined period.

Honeywell Device Client Pack - 5 Year Term + Maintenance

(License covers Launcher, Enterprise Browser, BasicTE, and Mobility Web SDK)

Maintenance Licenses provide software operation, software new version features, and tech support, all for a defined period.

Unitech Suction-up mounting kit

Honeywell SmartTE Terminal Emulator

SmartTE Single path initial license. Includes 1 Year maintenance

Terminal Emulator – Full featured SmartTE allows legacy green screen apps to be transformed to the look and feel of native apps. These clients are single session Honeywell TE Licensing. They can also utilize traditional single or multi-session StayLinked Licenses.

SmartTE is Pre-Loaded, but requires license

Honeywell SMARTTE – 3 Year Software Maintenance

Honeywell SMARTTE - 5 Year Software Maintenance