£0.00
Honeywell Power Cable, Dock-to-Fuse Block
A 182.9 cm (72 in) power cable with spade lugs and 3-pin connector for connection of Mobile Base to fuse block or similar connection point. Supports input voltage of 12–30V DC.
(Note: If direct connection to fuse block not available, requires use of 203-803-001 Fuse Block Power Kit. This kit is optional)
The USB-A to USB-B cable connects the printer device port (type B) to a PC host port (type A) to provide USB connectivity. Cable length is 2 m (6.5 ft).
Note: This USB cable ships standard with each Honeywell printer.
Honeywell Replacement 84 W 12V 7A power supply for use with quad battery charger.
Requires country-specific IEC C13 AC Power Cord) ordered separately
Honeywell USB power adaptor, 5 V, 2 A
Fits for: ScanPal EDA50 / EDA50hc / CN80, included: plugs (US, UK, EU, AU),
Order separately: USB cable
Honeywell cigarette lighter power adapter
Cigarette lighter power adapter, 1.8 m,
fits for: CN80 charging station, CN80 vehicle charging/transmitter cradle
Honeywell C13 Power cord, UK, IEC320-C13, 2.5 m (8.2 ft)
Honeywell C13 Power cord, Europe, IEC320-C13, 2.5 m (8.2 ft)
Honeywell Mounting Kit, for Honeywell Vehicle Holders
Honeywell Power option: For connection of vehicle dock to forklift power systems operating on 9 VDC to 60 VDC, 60 W, 12 VDC output. Use on vehicles with greater than 24 VDC power
Honeywell Power Supply For connection of vehicle dock to forklift power systems operating on 50 VDC to 150 VDC, 60 W, 12 VDC output. Use on vehicles with greater than 48 VDC power
Honeywell Rubber boot
fits for: CN80 (Extended range, scan handle)
Honeywell Stylus, pack of 5
incl.: tether
fits for: CN80 scan handle snap-on
Unitech Suction-up mounting kit
Vehicle Dock Fuse Block Power Kit RoHS (Provides connection to vehicle fuse block. Requires Power Cable (226-109-003). Order instructions (962-040-004) separately.)
Honeywell Vehicle Dock Cable, Serial
Adapts Vehicle Dock Comm Connector to RS232 Serial (DB9M) for connectivity to serial peripherals.
Honeywell Power Adapter, 12V 3A - Replacement 36W power supply for use with theEthernet home base and the charge-only home base.
Requires country-specific IEC C13 AC Power Cord ordered separately
Honeywell USB power cable
USB power cable, USB A to power barrel
fits for: CN80
Honeywell power supply, 102 W
order separately: power cord
fits for: 4 slot charging/transmitter station
Honeywell Vehicle Dock Mounting Kit - Required for Vehicle Dock or Vehicle Holder
includes one 4.75"" adjustable pivot arm with two 1.5"" stainless steel balls and assembly hardware
Requires hardware supplied by the customer to secure the mount to the vehicle
Industrial-Grade Micro-SD Card
Micro-SD card, 1 GB, AF1GUDI, ROHS
Micro-SD card, 2 GB, AF1GUDI, ROHS
Micro-SD card, 4 GB, AF1GUDI, ROHS
Micro-SD card, 8 GB, AF1GUDI, ROHS
Honeywell Charging station, 4 slot
incl.: power supply
Honeywell Charging / transmitter station, 1x CN80, 1x spare battery, Ethernet
Honeywell Charging station, 1x CN80, 1x spare battery
Honeywell Hand strap - pack of 5
fits for: CN80 (Extended range)
Honeywell Hand strap, pack of 5
fits for: CN80 (Standard range)
Honeywell Holster, CN80 without Scan Handle (Not compatible with Scan Handle)
incl.: belt clip
fits for: CN80 (brick version)
Honeywell Holster
incl.: clip
fits for: CN80 (Scan handle)
Honeywell Charging/transmitter station, 4 slot, Ethernet
fits for: CN80 (Standard range) Without Scan Handle
fits for: CN80 (Extended range) Without Scan Handle
fits for: CN80 (Standard range, scan handle)
Honeywell CN80 Scan handle, snap-on
Snaps easily on or off the mobile computer. Compatible with charging docks, vehicle holder, hand strap, and snap-on adapters
Compatible with Home Base and Charge Base/ Net Base Charger without removal.One stylus with tether is included with each CN80 scan handle
NOT Compatible with Vehicle Docks CN80-VD-WL-0 OR CN80-VD-SRH-0
Honeywell Charging cup, RS232, USB
incl.: USB charging cable
Provides 2-pin barrel power jack for power and DB15 receptacle for serial and USB host connectivity.
Requires USB cable VE011-2016 (host) and/or 225-737-002 (USB to serial adapter cable). Compatible with hand strap and scan handle. Kit includes snap-on adapter and 2-pin barrel to USB type-A power cable.
Optional 50130570-001 USB power wall adapter sold separatel
Honeywell Snap-on adapter, USB
Provides tethered USB client connectivity. Compatible with hand strap and scan handle. Kit includes snap-onadapter.
Optional 50130570-001 (5 V/2 A) USB power wall adapter sold separately
Honeywell Vehicle charging snap-on with USB Port and Auto Adapter
Kit includes CN80-SN-USB-0 and ACGMTRACKCWU1 (Universal Cigarette Lighter Port to USB Type-A Power Adapter)
Honeywell Screen protector - pack of 10
Honeywell vehicle charging/transmitter cradle, USB, RS232
incl.: vehicle power supply
Honeywell Vehicle charging station, wireless charging
The wireless charging dock enhances durability in harsh environments by eliminating all connectors between the dock and the device. Retains mobile computer in vehicle environment. Easy one-handed removal of device. NFC capable for seamless Bluetooth™ pairing. Provides hard-wired 3-pin power jack. Kit includes vehicle dock and cigarette lighter adapter cable: 50138169-001.
Mounting kit and power cables sold separately. The dock supports direct connection to 12 VDC or 24 VDCvehicles. For higher voltages, use a 9000311PWRSPLY or 9000313PWRSPLY DC/DC converter. Not compatible with scan handle
Honeywell Vehicle holder
Retains mobile computer in vehicle environment. Easy one-handed removal of device. Does not provide connectivity to power the device. Compatible with scan handle and hand strap. Ships in CN80 compatible configuration. Plastic insert can be removed in the field to support future 80 series computers.
RAM mounting kit sold separately
Honeywell Battery Pack 5800 mAh
Honeywell battery charger, 4 slot
Order separately: power cord
for: CN80
Honeywell Single USB type A breakout cable
Frequently Bought Together
Find all the additional items you may need for this product.
Out of stock item:
