The new LX-Rewinder spares you the trouble of self-rewinding printed labels on label cores and is therefore effectively time-saving. Smooth Production Process
As soon as you connect the LX-Rewinder to a printer, a great amount of labels can be produced smoothly and continually. An acoustic signal informs the user that the rewinding process has stopped and a new one can be started. Plug In and Go
The LX-Rewinder is compatible to each printer of the LX900e/810e series. After installing the LX-Rewinder just connect the supply cable - enclosed to the scope of delivery - to the printer. Then load an empty label core and attach the label to the core. The LX-Rewinder is now ready. After a short time you get perfectly rewind label rolls - ready to use.Flexibility and Stability
Because of a flexible adjusting shaft cores of any diameter and width can be used. The rubber stoppers placed on the LX-Rewinder fit the feet of the LX-printer perfectly. That way both units are safely interlinked. In addition, an arm support can be installed to increase the stability of the Rewinder. Applications
The Primera LX900e Rewinder is used to rewind labels from a 3" core holder. The rewinder can handle labels up to 220mm wide and rewind rolls with external diameter up to 250mm. Operating Modes
The Primera LX900e Rewinder has two types of speed adjustment: it is possible to set the main speed through a knob and the tension arm automatically adjusts the speed from zero up to the selected speed.
The position of the tension arm is calibrated as follows:
When the tension arm is in a central position, the device is idle; When the tension arm is down, the device rewinds the labels; When the tension arm is up, the device unwinds the labels;
When the rewinding operations are finished, the rewinder stops thanks to the contact between the tension arm and the base and an acoustic signal sounds to let you know the rolls of labels is ready.